The screen is blank and it is blinking.
Problems related to Audio
Note
zIf you see the "TEST GOOD" message on the screen when you pressing the MENU button, check the cable connection between the LCD Display and the computer to ensure that the connector is properly connected.
• Problems related to audio signals and their solutions are listed below.
Problems
No sound.
The sound level is too low.
Solutions
zEnsure that the audio cable is firmly connected to both the
(Refer to the Connecting the LCD Display )
zCheck the volume level.
zCheck the volume level.
zIf the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.
The sound is too high or too low. | z Adjusts the Treble and Bass to the appropriate levels. |
Problems related to the Remote Control
Note
• Problems related to the remote control and their solutions are listed.
Problems
The remote control buttons do not respond.
Question
How can I change the frequency?
How can I Adjusts the resolution?
Solutions
zCheck the polarities
zCheck if the batteries are empty.
zCheck if the power is on.
zCheck if the power cord is securely connected.
zCheck if a special fluorescent or neon lamp is on in the vicinity.
Q & A
Answer
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)
zWindows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Settings.
zWindows ME/2000:
Set the resolution in the Control Panel → Display → Settings.
*Contact the video card manufacturer for details.
How can I set the Power Saving function?
zWindows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver.
Set the function in the
zWindows ME/2000:
Set the resolution at the Control Panel → Display → Screen Saver.
Set the function in the