Samsung LS32BHLNB/XSA, LS32BHLNBF/EDC manual Contrast, Brightness, Red Green Blue, Coarse, Fine

1)Contrast

Adjusts the Contrast.

2)Brightness

Adjusts the Brightness.

Note

• By adjusting the picture using the Custom function, MagicBright will change to Custom mode.

Color Tone

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER]

The color tones can be changed.

1)Cool

2)Normal

3)Warm

4)Custom

(Available in PC, BNC mode only)

Color Control

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >] → [ENTER]

Adjusts the individual R, G, B color controls.

(Available in PC, BNC mode only)

1)Red

2)Green

3)Blue

Note

• If you adjust the picture by using the Custom function, Color Tone will turn to the Cusome mode.

Image Lock

Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

(Available in PC, BNC mode only)

1)Coarse

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >] → [ENTER]

Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.

2)Fine

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] →[ENTER] → [< / >] → [ENTER] Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed).

3)Position

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] →[ENTER] → [< / >] / [∧ / ∨]→ [ENTER]

Adjusts the screen location horizontally and vertically.

Auto Adjustment