![](/images/new-backgrounds/1235378/235378285x1.webp)
1)Red
2)Green
3)Blue
Note
• If you adjust the picture by using the Custom function, Color Tone will turn to the Cusome mode.
Color Temp ![](/images/new-backgrounds/1235378/235378285xi3.webp)
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
Color Temp is a measure of the 'warmth' of the image colors. (This function is only enabled if the Color Tone is set to Off.)
Brightness Sensor ![](/images/new-backgrounds/1235378/235378285xi4.webp)
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness.
1)On
2)Off
Image Lock ![](/images/new-backgrounds/1235378/235378285xi5.webp)
Image Lock is used to
(Available in PC, BNC mode only)
1)Coarse
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >] → [ENTER]
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.
2)Fine
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] →[ENTER] → [< / >] → [ENTER] Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed).
3)Position
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] →[ENTER] → [< / >] / [∧ / ∨]→ [ENTER]
Adjusts the screen location horizontally and vertically.
Auto Adjustment ![](/images/new-backgrounds/1235378/235378285xi6.webp)
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER]
The values of Fine, Coarse, Position are adjusted automatically.
By changing the resolution in the control panel, the auto function is performed.
(Available in PC, BNC mode only)