Settings
•Save: Save the changes and restart the device.
•Exit: Restart the device without saving the changes.
Setup menus
•SysInfo: View the basic specifications of the device.
•Advanced: Configure the advanced settings and perform the battery calibration.
•Security: Configure security functions.
•Boot: Configure
Setting the boot password
Setting a password with the BIOS enhances protection against viruses and hacking attacks. On the BIOS screen, tap Security.
The following password settings are available:
•Supervisor Password: This password is required when turning on the device or entering the BIOS screen. This password allows you to enter the BIOS screen as an administrator. You can change the BIOS settings.
•User Password: This password is required when turning on the device or entering the BIOS screen. This password allows you to enter the BIOS screen as a user. You cannot change the BIOS settings. The password will be deactivated automatically if the supervisor password is removed.
•HDD Password: This password is required to access the hard disk drive (HDD) from the device. This password may not be supported depending on the model.
Do not forget your password or expose it to others.
•If you forget your supervisor password or HDD password, contact a Samsung Service Centre.
•If you forget your user password, you can remove it by removing the supervisor password.
63