2Using "Zero Client"
To automatically configure several settings for the Client all at once using DHCP upon boot up, configure the DHCP Options IDs.
Ensure the setting is specified between 128 and 254.
If this option is configured, the setting specified will replace the customized setting.
Requirements
Local Network must be set to Enable DHCP.
Information about the Options IDs must be configured on the DHCP server.
Security
Client provides a security function using IEEE802.1x authentication.
Available modes
EAP-TLS
To use this function, select Enable IEEE802.1x Authentication and specify the Authentication mode.
1EAP-PEAP
To use
Click Properties, and enter the Username and Password for authentication.
2 Using "Zero Client" 36