Samsung LH55LBPLBC/XS, LH40LBTLBC/EN, LH40LBPLBC/EN, LH55LBTLBC/EN, LH55LBPLBC/EN Troubleshooting

Page 72

zNatural

3)Video Wall (Screen divider)

-The screen can be divided into.

You can select a number of screens with a different layout when dividing. z Select a mode from Screen divider.

z Select a display from Display Selection.

z The place will be set up by pressing a number in the selected mode.

z The maximum number of monitors that can be arranged: Horizontal X Vertical = 100

z Up to 15 monitors can be arranged in a row. The maximum value for Horizontal is 6 if Vertical is set to 15 while the maximum value for Vertical is 6 if Horizontal is set to 15.

4)Viewing Screen Splits

-You can view and change the layout of screens using the Screen Divider settings.

The range of the Screen Divider setting may differ depending on the model.

You may not operate this function in MagicInfo.

The Input source of TV works only on TV model.

The Maintenance Control function is available only for the displays where the power status is ON.

Troubleshooting

1.The display you wish to control does not appear on the System Info Grid

-Check the connection of RS232C. (Check if it is properly connected to the Com1 port

-Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict.

-For monitors that support a Set ID between 0 to 99, you have to set the Set ID to a value between 0 and 99. Note : Check if the Set ID of the monitor is a value between 0 and 99 (set the value using the Display menu).

2.The display you wish to control does not appear on the other Control Info Grids

-Check to see if the display power is ON. (You can check this in System Info Grid)

-Check if you can change the input source of the display.

3.The dialogue box appears repeatedly.

-Check to see if the display you wish to control is selected.

4.Both On Timer and Off Timer have been set but different time is showing.

-Apply current time to synchronize the display clocks.

5.The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal functions.

<Note> This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby.

Page 71 Page 73
Image 72
Page 71 Page 73
Contents LCD Display SyncMaster 400EXn, 460EXn, 550EXnPower NotationalInstallation Clean Others Page Page Page Package Contents Checking the Contents of the PackageUnpacking ManualsCables OthersYour LCD Display Front Sold separatelyPC → AV → Component → Hdmi → MagicInfo Rear Power Resets MagicInfoHdmi To lock the product, follow these steps AudioRemote Control Menu Return ExitMTS Mechanical Layout400EXn LCD Display Head Installation Vesa Bracket DimensionsWall Bracket Installation Wall Bracket Assembly ComponentsTo mount the product on the wall bracket Page Wall Bracket Angle Adjustment Introduction Dimensions Page To mount the product on the wall bracket Wall Bracket Angle Adjustment Page Dimensions Wall Bracket Assembly To mount the product on the wall bracket Wall Bracket Angle Adjustment Page Connecting a Computer ConnectionsConnecting to Other devices Connecting an External Monitor Connecting Using a RGB to AV CableConnecting Using a Hdmi Cable Connecting Using a DVI to Hdmi Cable Connecting a DVD PlayerConnecting a DTV Set Top Cable/Satellite Box Connecting to an Audio System Connecting a LAN CableConnecting a USB devices Assembling the CablesInstalling the Monitor Driver Automatic Monitor DriverInternet web site Installing the Monitor Driver Manual Page Page Page Page Page Page MDC Installation Problems UninstallIntroduction Main ScreenPort Selection System Page Input Source MDC OSDPage Image Size HDMI1/HDMI2Time Time Setting up Timer and Holiday Management PIP PIP SizePIP Source Settings Picture Settings Picture PC Page Settings Audio Settings Image LockMaintenance Lamp Control Maintenance Scroll Maintenance Video Wall Page Troubleshooting Settings Value Display In Multiple Display Mode Ehternet MDC Add a Device System Page Network Page PC, BNC, DVI, DP Time Time Setting up Timer and Holiday Management PIP PIP Source Setting Picture Setting Picture PC Setting Audio Setting Image Lock Maintenance Lamp Control Maintenance Scroll Maintenance Video Wall Page Troubleshooting Page Input Available Modes Source ListComponent MagicInfoSource SizeOff Position TransparencyEdit Name High Medium Low OpaquePicture PC / MagicInfo Mode Available Modes MagicBrightCustom Color Tone SharpnessOff Cool Normal Warm Custom Color Control Color TempImage Lock Auto Adjustment CoarseFine Signal Balance Signal ControlGain Hdmi Black Level OffsetPIP Picture Normal LowDynamic Contrast ColorTint Lamp Control Brightness SensorAuto Motion Plus 120Hz → ENTER→ Auto Motion Plus 120HzOff switches Auto Motion Plus 120Hz off Standard sets Auto Motion Plus 120Hz to Standard mode→ Judder Picture AV / Hdmi / Component Mode Available Modes ModeDynamic, Standard, Movie, or Custom can be activated Dynamic Standard Movie CustomContrast BrightnessSharpness ColorMenu → → Enter → → → → → → Enter → Digital NR Digital Noise Reduction Film Mode Dynamic Contrast Lamp Control Off switches Auto Motion Plus 120Hz off Sound Available Modes MusicSpeech Auto Volume BassTreble BalanceSound Select Speaker SelectMain Sub Setup Available Modes LanguageInternal ExternalSleep Timer TimeClock Set Timer1 / Timer2 / Timer3 Holiday Management→ ENTER→ Holiday Management Add Delete SelectedMenu Transparency Delete AllSafety Lock Change PIN LockEnergy Saving Video Wall FormatHorizontal VerticalFull NaturalSafety Screen Screen PositionPixel Shift Timer Period Scroll Bar EraserScroll BarMode-Scroll 1~5 sec Mode-Bar,Eraser 10~50 sec Eraser Side GrayImage Retention Free Off Light DarkResolution Select Power On AdjustmentOff 1024 X 1280 X 1360 x 1366 X Reset Image ResetOSD Rotation Landscape PortraitColor Reset Multi Control Available ModesMulti Control ID Setup MagicInfo Available ModesID Input MDC ConnectionMagicInfo Page Page Page Self-Test Feature Check Maintenance and CleaningSymptoms and Recommended Actions Problems related to the Installation PC ModeCheck List Problems related to the Screen Not Optimum Mode messageProblems related to Audio Problems related to the Remote ControlPage Page General PowerSaver Vesa Mounting InterfaceEnvironmental considerations Plug and Play CapabilityPreset Timing Modes StateMHz KHz VESA, 800 x 37.879 60.317 40.000 For a Better Display Product Information Image Retention FreePower Off, Screen Saver, or Power Save Mode Change the Color Information periodically Apply the Image Retention Free function on Product MagicBright Mode Entertain Usage GuideContact Samsung Worldwide North AmericaLatin America EuropeCIS Terms Asia PacificMiddle East & Africa Correct Disposal Authority Correct disposal of batteries in this product Europe only
Related manuals
Manual 25 pages 9.44 Kb Manual 25 pages 55.67 Kb Manual 162 pages 53.24 Kb Manual 162 pages 23.96 Kb Manual 159 pages 59.34 Kb Manual 160 pages 11.14 Kb Manual 159 pages 28.29 Kb Manual 161 pages 7.35 Kb Manual 25 pages 1.99 Kb Manual 165 pages 27.52 Kb Manual 26 pages 618 b Manual 174 pages 36.42 Kb Manual 160 pages 37.07 Kb Manual 165 pages 50.37 Kb

LH55LBTLBC/XJ, LH46LBPLBC/EN, LH46LBTLBC/XY, LH55LBPLBC/XY, LH55LBPLBC/XS specifications

Samsung's latest series of professional displays, including models LH55LBTLBC/ZA, LH46BVTLBC/EN, LH55LBTLBC/EN, LH40LBTLBC/EN, and LH40LBPLBC/EN, represents a leap forward in visual technology. Designed for high-impact environments, these displays cater to a variety of settings, from corporate spaces to public venues.

One of the standout features of the Samsung LH series is their stunning visual performance. Equipped with advanced LED technology, these displays deliver vibrant colors and sharp images that enhance the viewing experience. The high brightness levels ensure visibility even in well-lit environments, making them suitable for both indoor and outdoor use. Additionally, the ultra-narrow bezels create a seamless look when multiple screens are used together, ideal for video walls.

The Samsung LH series also boasts impressive durability. Built to withstand 24/7 operation, these displays are engineered for longevity, which is crucial in demanding commercial applications. Their robust design includes protection against dust and humidity, ensuring reliable performance over time.

Other notable characteristics include the versatility in configuration options. The series supports both landscape and portrait orientations, providing flexibility in display setups. This adaptability makes it easy to tailor the display to the specific needs of any environment.

In terms of connectivity, the Samsung LH models come equipped with a variety of ports, including HDMI, DisplayPort, and USB, enabling seamless integration with other devices. This wide range of connectivity options facilitates easier content sharing and management across multiple platforms.

Moreover, the series incorporates Samsung's sophisticated digital signage management solutions, allowing users to control and schedule content remotely. This feature streamlines operations and enhances the overall effectiveness of the display in engaging audiences.

With their high-end performance, versatile installation options, and robust construction, the Samsung LH55LBTLBC/ZA, LH46BVTLBC/EN, LH55LBTLBC/EN, LH40LBTLBC/EN, and LH40LBPLBC/EN displays are exceptional choices for any business looking to elevate its visual communications. These models stand out as prime examples of Samsung's commitment to innovation, quality, and customer satisfaction in professional display technology.
Top Page Image Contents