Troubleshooting
A:Adjust color using Custom under OSD Color Adjustment menu.
Q:The color white is poor.
A:Adjust color using Custom under OSD Color Adjustment menu.
Q:The Power Indicator blinks.
A:The LCD Display is currently saving the changes made in the settings to the OSD memory.
Q:The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.
A:The LCD Display is using its power management system.
A:Press any key on the keyboard.
Q:The screen is blank and it is blinking.
A:If you see the "TEST GOOD" message on the screen when you pressing the MENU button, check the cable connection between the LCD Display and the computer to en- sure that the connector is properly connected.
Problems related to Audio
Note
Problems related to audio signals and their solutions are listed below.
Q:No sound.
A:Ensure that the audio cable is firmly connected to both the
(Refer to the Connecting a Computer)
A:Check the volume level.
Q:The sound level is too low.
A:Check the volume level.
A:If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.
Q:The sound is too high or too low.
A:Adjusts the Treble and Bass to the appropriate levels.
Problems related to the Remote Control
Note
Problems related to the remote control and their solutions are listed.
Q:The remote control buttons do not respond.
A:Check the polarities
A:Check if the batteries are empty.
A:Check if the power is on.