INSTRUCTIONS FOR LAMPING
1.Check to see that power is OFF before Iamping or relamping.
2.Remove APERTURE BAFFLE from HOUSING by pulling straight out as shown in Fig. 2.
3.Assemble LAMP to APERTURE BAFFLE as shown in Fig. 3 making certain GLASS LAMP GUARD is sandwiched between LAMP and APERTURE BAFFLE, and firmly held in placce by LAMP SPRINGS. CAUTION: Do not touch lamp capsule with bare fingers.
4.Connect SOCKET to LAMP by inserting pins on LAMP into holes in SOCKET (Fig. 3).
Replace APERTURE BAFFLE back into HOUSING
by pushing straight in.
1S:8672
0989
Page 2 of 2
I
n
H
HOUSING
APERTURE BAFFLE
WARNING: LAMP MANUFACTURERS REQUIRE THE GLASS LAMP GUARD BE IN PLACE BEFORE ENERGIZING LAM~ AND THAT GREAT CARE SHOULD BE TAKEN THAT LAMP IS FULLYCOOLED BEFORE RELAMPING. COLOR FILTERCAN BE
USED IN PLACE OF GLASS GUARD.
1
NOTE: LOW VOLTAGE FIXTURES should be
dimmed only with special dimmers intended
specifically for that purpose. Use Lightolier
Lytemode, Scenist, Crescendo VA, Neptune VA,
Precision VAI, Easyset VA, Sunrise VA, Radiant
VA or equivalent products by others or variable
intended for use with low voltage fixtures.
NOTE: Lamp wattage 50W max.
FIG. 2
SOCKET
d
GLASS LAMP
Ell | ADi_I | T | IT | CLAMP |
““”, | ,” |
|
|
|
LAMP SPRING
1=BAFFLE
FIG. 3