Using the battery pack
Charging the mobile device
1 | Connect one end of the USB cable to the battery pack’s USB charger port. Then, plug the |
| other end of the USB cable into the mobile device’s multipurpose jack. |
2 | After the mobile device is fully charged, disconnect the USB cable from both devices. |
•Depending on your mobile device’s multipurpose jack, you may need to use the Micro USB connector.
•To begin fast charging, connect a mobile device that supports fast charging to the battery pack.
•If the mobile device is not charging after being connected to the battery pack, press the Reset/Battery Level button.
•If the battery pack encounters an error, such as displaying a full indicator light when the connected mobile device is not fully charged, press the Reset/Battery Level button for more than 7 seconds.
•The battery pack is an auxiliary external battery. It may not fully charge some mobile devices.
•If the battery pack is exposed to extremely hot or cold temperatures or an error occurs, the indicator light will flash white. Disconnect the mobile device from the battery pack, and then reconnect them.
English (USA)
8
6