Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the mains and antenna.
VHF/UHF Antenna | Cable | TV Rear Panel |
or
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of
✎✎To return to the previous step, press the Red button.
1
2 Selecting Store Demo or Home Use
3 | Selecting a country |
4 | Setting the Clock Mode |
5 | Selecting an antenna |
6 | Selecting a channel |
7 | Enjoy your TV. |
Press the ▲ or ▼ button, then press the ENTEREbutton. | POWER |
Select the desired OSD (On Screen Display) language. | P |
Press the ◄ or ► button, then press the ENTEREbutton. | |
Select the Home Use mode. Store Demo mode is for retail environments. |
To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed,
press and hold MENU for 5 sec.
Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the appropriate country.
✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.
✎✎When you input the PIN number,
✎✎The option may differ depending on country. Set the Clock Mode automatically or manually.
Auto: Select the time zone (depending on the country) where you are located.
Manual: Allows you to manually set the current date and time. Press the ▲ or ▼ button, then press the ENTEREbutton. Select the desired broadcasting signal.
Press the ▲ or ▼ button, then press the ENTEREbutton.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Tuning.
Press the ENTEREbutton at any time to interrupt the memorisation process. Select the Watch TV. Press the ENTEREbutton.
✎✎If you select the Network Settings, set the network. For more information, refer to “Network menu” in the
If You Want to Reset This Feature...
You should do Plug & Play (MENU → System) again at home although you did in shop.
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is
✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
English - 6