Samsung YP-T7Z/XAA Recording MP3s, Searching for Music/Voice Files, To change tracks during play

Recording MP3s

✽To move to other modes from the LINE_REC mode, refer to page 47 "Changing Mode"

1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable.

● Press the play button on the external

device to play the music to record.

2 Press and hold the REC button to start MP3 recording.

●If the button is pressed, recording is paused and if the button is pressed again, the recording resumes.

3 If the REC button is pressed during recording, the recording stops and an MP3 file is created.

●The files are recoded in the order of L001, L002....

and saved as MP3 file in LINE_REC folder after recording.

Note

-Bit Rates can be set within the range of 32Kbps~192Kbps.

-Beeps are disabled while recording.

-Recording is allowed only when there are 1MB or more of free memory .

Notice

-Do not disconnect the Line cable during Recording.

-If the battery is not sufficiently charged, the player will not completely encode the file.

-Adjust the volume of the external audio source to a suitable level and recode it.

42If the volume level is too high, the sound quality may be poor.

Searching for Music/Voice Files

To search for specific parts during play

● Push and hold the “M” button left or right during playback to search for

the a specific section of the music file you want to listen to.	ENG
● Release the “M” button to resume play normally.

To change tracks during play

●Push the “M” button to the position briefly during playback to play the next track.

●Push the “M” button to the position briefly within 3 seconds after playback starts, to move to and play the previous track. Push the “M” button to the position briefly after 3 seconds to play the current track from the beginning.

To change tracks when stopped/paused

●Push the “M” button left or right in stop/pause mode to move to the previous/next track.

Note

-VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file.

-When playing a VBR file, you cannot move to and play the previous track even if you push

the “M” button to the position within 3 seconds after playback starts.

-Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.

43