Manual Installation of the USB Driver
Go to “Downloading File” if the USB driver is in place.
Follow these steps if the USB driver is not in place :
I When an error occurs during installation of the USB driver
1 Check the device manager.
●Windows 2000 (Professional):
Control Panel → System → Hardware → Device Manager
●Windows XP (Professional):
Control Panel → System → Hardware → Device Manager
2 Check if there is a device listed with an exclamation point or a question mark (displayed as unknown device or USB device).
3 Double click on the device listed with an exclamation point or a question mark.
Manual Installation of the USB Driver
✍NNoottiiccee
-If you are using Windows 2000 and your version of Windows does not recognize the USB driver please download and install the latest service pack from windowsupdate.microsoft.com
-The installation method may vary depending on the type of PC or operating system. Contact your PC dealer or service center for installation information.
-If errors occur continuously when you install the USB driver, reconnect the USB cable after rebooting your system.
4 After selecting the driver, | 5 Select a compatible driver, |
click on [Update Driver]. | click on [Next] to finish. |
ENG
18 | 19 |