
Connecting yepp to PC with USB cable
3 Plug one end of the USB cable into the USB port on the back of the PC.
4 Insert the battery into the yepp and turn on the power.
5 Slide down the bottom cover of the player. Plug the other end of the USB cable
into the USB port on the right side at the bottom.
●PC may temporarily malfunction if you unplug the USB cable from PC while yepp Explorer is initiating or executing a command.
6 USB driver is installed a message saying that it is searching for a new device. You may not see the display screen during installation.
Go to the device manager to check that installation has been successfully completed.
USB connect cable
7 When USB driver is installed, "SAMSUNG
to the right.
Note :
HowHow toto checkcheck USBUSB driverdriver
Windows 98,ME:
Control Panel ➝ System ➝ Device Manager ➝
Universal Serial Bus controllers/SCSI and RAID controllers
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
Windows XP:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
8 When USB driver is not Installed automatically, refer to next page.
14 | 15 |