Voice Recording

Recording the voice messages

1Press the MODE button on the main unit to switch into the voice mode.

-Voice mode can only be activated in the stop mode.

2Press the REC button and the voice messages will be recorded through the microphone.

-Press the Stop button ( ) to stop recording. If you repeat this operation over and over, the voice messages will be recorded in the sequence of V001, V002....V00N.

Note

-This feature allows you to easily record lectures at school or institute, interview and conference messages, etc. It therefore enhances study effectiveness and lets you keep important things for a long time.

-The player will automatically stop recording when the memory becomes full.

-The voice messages are recorded on the built-in memory. If the memory is short in capacity, however, they will be recorded on the smart media card (in the sequence of V001, V002... V00N).

-Be careful not to press the Erase button long because the erasing function may run.

-Voice recording is made only on the main system.

Playing the recorded voice messages

1Use the FF ( ) and REW ( ) buttons to select the track (V001, V002...) you prefer.

2Press the button to playback the selected track.

You can pause the track by pressing the button once again.

- Press the button again to resume playback.

Note

-When you press the button without selecting V001,

V002... V00n, you can listen to the recorded track that applies to the number currently shown on the LCD panel.

-Press the FF or REW button during playback to move forward or in reverse at a faster speed.

Playing the recorded voice messages

1Use the FF and REW buttons to select the track (V001, V002...) you want to erase.

2Press the ERASE button for at least 1 second and the message "Erase?" will appear on the LCD panel. Then

press the button to erase the selected track.

Note

-To cancel the erasing function press the button.

-After the selected track is erased, the player will show the next track number.