Connecting yepp to PC or Mac, Hold mode

Setting the Modes (continued...)

Hold mode

Press the button long on the MP3 mode to change to setup mode. Press the / button to select the Hold,

then press the button.

Note On Hold mode, no button on system won’t work.

Each time a button is pressed, Hold message will shortly appears. In order to stop Hold mode, press the button long.

Erase mode

Press the button long on the MP3 mode to change to setup mode. Press the / button to select the Erase,

then press the button. The message “ERASE?“ will

appear, then press the button.

Note

-After erasure, your yepp will display next song title and then be turned to the primary display automatically.

-Erasure will not be done during play mode.

-Press the button to cancel the erasure.

Connecting yepp to PC or Mac

1Connect the USB cable

to the USB port of the computer.

2 Turn on the yepp and connect the other end of the cable to the download connector.

Note

- Make sure to install the yepp explorer before connecting your yepp to PC or Mac. When the message “Add New Hardware Wizard” appears on the screen, click [Cancel] and then install the yepp explorer.

-Please refer to next page when USB driver is not installed automatically.

Minimum PC System Requirements

- Pentium 133MHz at least - Windows 98/2000

- Mac OS 8.6~9.0.4

- 20MB Free Disk Space

-CD-ROM Drive (Optimum: 8X and more)

-Built-in USB Port

English