USING THE MUSIC MENU (Continued)
To set Section Repeat
This function enables you to listen to specific parts of a track repeatedly. It’s helpful when learning a language.
1.Tap [ ] at the point you want while listening to music.
The <Music> menu appears.
2.Tap the [Up, Down] button to select <Repeat
Section Repeat setup screen appears.
3.Tap [ ] at the beginning of the section you want to repeat.
The starting point is set and < > mark will appear on the play status bar.
Music
Sound Effect
DNSe
Play Mode
Music Play Screen
Play Speed
RisingSkip IntervalSun
Repeat
02:1304:28
4.Tap [ ] again to set the ending of the section you want to repeat.
< > mark will appear on the play status bar and the specified section starts to play repeatedly.
To cancel Section Repeat
1.Tap [ ] during Section Repeat.
Section Repeat will be cancelled.
Section Repeat will be automatically cancelled in the following case.
NOTE - The starting point of the section repeat is set but the ending point is not set until after the current track ends.
-The end point is set for less than 3 seconds of playback after the start point.
listening to music _ 53