Samsung HTDS1000TH/XAA Connecting the Speakers, HT-DS1000, Connecting Main Unit to Subwoofer

Connectingthe Speakers

Connect the front, rear and center speakers to the speaker output jack on the side of subwoofer.

HT-DS1000

Bottom of Main unit

(HT-DS1000)

Rear Speaker (R)

Gray

Rear of Subwoofer (PSWS1000E)

Center Speaker

Green

Rear Speaker (L)

Blue

Red	White
Front Speaker (R)	Front Speaker (L)

Connecting Main Unit to Subwoofer

1

2

Use the supplied DIN audio connection cable to connect DIN Audio Out on the main unit to DIN Audio Input on the subwoofer.

Press the subwoofer power button on the subwoofer to turn on the power.

Subwoofer Function

Subwoofer: The subwoofer is active, with a built-in a 150W amplifier, and outputs rich bass through 8 inch speaker units. You can listen to the optimal LFE (bass) by using the subwoofer-only volume control and the variable crossover control.

• The control is calibrated from –6dB (minimum) to +6dB (maximum).

Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the

Crossover control for the best bass response in your room.

•You can adjust the bass or treble output from the front, rear, center speakers and the subwoofer.

•To the left increases the bass and to the right, treble.

15