Basic Functions
DSP (Digital Signal Processor)/EQ
•DSP (Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.
•EQ : You can select POPS, JAZZ , ROCK, or USER to optimize the sound for the genre of music you are playing.
DSP /EQ
Press the DSP/EQ button.
POPS, | Select POPS, JAZZ, or ROCK, | |
JAZZ, | depending on the genre of music | |
ROCK | you're listening to. | |
| You can enjoy music as you set in | |
| “EQ:USER ”. | |
USER | If you press ENTER in the “EQ:USER” | |
menu, you will see a window where you | ||
| ||
| can change the EQ settings to your | |
| preference. | |
STUDIO | Provides a sense of presence as if in a | |
studio. | ||
| ||
|
| |
CLUB | Simulates the sound of a dance club | |
with a throbbing bass beat. | ||
| ||
|
| |
HALL | Provides a clear vocal as if listening in a | |
concert hall. | ||
| ||
|
| |
MOVIE | Provides the feeling of a movie cinema. | |
|
| |
CHURCH | Provides the feeling of being in a | |
grand church. | ||
| ||
|
| |
OFF | Select this for normal listening. | |
|
|
✎NOTE
The DSP/EQ function is only available in Stereo mode.
The DSP/EQ function is not available while playing AC3 signal in 2.1 channel mode.
Listening to Radio
Using buttons on the Remote Control
1.Press the FUNCTION button to select FM.
2.Tune in to the desired station.
•Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP () button
to select PRESET and then press the TUNING/
CH (
) button to select the preset station.
•Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/CH
(
) button to tune in to a lower or higher frequency.
•Automatic Tuning : Press the STOP () button to
select MANUAL and then press and hold the
TUNING/CH (
) button to automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.Press the FUNCTION button to select FM.
2.Press the TUNING/CH (
) button to select <89.10>.
3. Press the TUNER MEMORY button.
• Number flashes on the display.
4. Press the TUNING/CH (
) buttons to select preset number.
•You can select between 1 and 15 presets.
5.Press the TUNER MEMORY button again.
•Press the TUNER MEMORY button before number disappears from the display.
•Number disappears from the display and the station is stored in memory.
6.To preset another station, repeat steps 2 to 5.