To connect the Wireless Audio with Dock using a WPS PIN
1.Press the 
button on the top panel of the Wireless Audio with Dock repeatedly until the 
or 
icon appears in the display.
•Each time you press the button, the selection changes as follows :
;
; 
;
;
;
; AUX (LED Off) The indicator changes from white to red and blinks.
2.Press and hold the WPS/RESET button on the back panel with a pen tip or similar item for more than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice more, and then release the WPS/RESET button.
•The icon blinks in red, and then stops blinking and glows in red when the unit accesses the Network Setting mode.
3.To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio E750 XXXXXXX" in the
ex) Samsung Galaxy Device
4.Open the web browser of the
5.Press or touch Samsung Wireless Audio with Dock Status.
6.The WPS PIN number appears on the bottom of the screen. Note or write down the number, and then turn the Wireless Audio with Dock unit off and then on.
7.Access the
8.Type the Wireless Audio with Dock's WPS PIN number into the appropriate field of the
9. Press and hold the WPS/RESET button on the back panel | 6 | |
| ||
of the Wireless Audio with Dock with a pen tip or similar item for more than 10 seconds in the | ||
or | mode. The indicator blinks once in white, and then twice. Wait until the indicator blinks three | |
times, and then release the button.
•The icon blinks in red.
10.If the connection between the Wireless Audio with Dock and the AP is completed within 90 seconds, the indicator changes from red to white.
•The Wireless Audio with Dock connection is complete.
▪▪ The
Direct connection may succeed in some cases, but it is not supported function by this product.
EnG ections ●conn
19