Setting Up the Display Options, Center

Setting Up the Audio Options		Surround Sound Speaker Setup

Surround Sound Speaker Setup		Setting Up the Display Options

PCM Down Sampling

1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.

2.Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.

Note Even when PCM Down sampling is Off

•Some discs will only output down sampled audio through the digital outputs.

•High sampling rate DVD-Audio discs (192KHz or 176.4KHz) always output audio down sampled to 96KHz or 88.2KHz through the digital outputs.

•When playing LPCM or PPCM DVD protected by copyright. If digital audio source is 48KHz/16bit the Digital output is mute.

Speaker Setup (See pages 34~35)

Note

•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.

•Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

•DVD-AUDIO

-Outputs 2 channel digital audio only.

-Some DVD-AUDIO discs do not downmix, so they will not output 2 channel digital audio.

-MULTI channel DVD-AUDIO discs play back through the analog outputs.

•Super Audio CD

-Outputs analog signals only.

•HDMI

-If your TV is not compatible with compressed multi-channel formats(Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.

-If your TV is not compatible with LPCM sampling rate over 48kHz, you should set PCM Down Sampling to On.

-Super Audio CD audio is only available through the analog outputs. It is not possible to output Super Audio CD audio via the HDMI output or Digital Audio Output.

1.With the unit in Stop mode, press the MENU button.

2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

3.Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4.Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button.

		AUDIO SETUP
	Dolby/DTS Digital Out	: PCM
	MPEG-2 Digital Out	: PCM
	Dynamic Compression	: On
	PCM Down Sampling	: On
	Speaker Setup

5.Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button.

SPEAKER SETUP

The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small).

Select the size of the speakers to be connected.

• Front (FL, FR)

-Large: Normally select this.

-Small: When the sound distorts or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the speaker from the subwoofer.

• Center

-None: If you do not connect a center speaker, select this.

-Large: Normally select this.

-Small: When the sound distorts, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers.

•Surround (SL, SR)

-None: If you do not connect a center speaker, select this.

-Large (Rear/Side): Normally select either of these according to the rear speaker’s position.

-Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear, select either of these according to the rear speaker’s position. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers.

Setting up TEST

The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system.

FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)

Note

How to make the SETUP menu disappear or return to menu screen during set up. Press RETURN or LEFT button.

•The subwoofer test output signal is lower than the other speakers.

•The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.

•If you set Front (L, R) “Small”, LFE (Subwoofer) is set “On” automatically.

1.With the unit in Stop mode, press the MENU button.

2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

3.Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4.Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

HDMI/DVI

TV ASPECT

4:3 Letter Box

4:3 Pan Scan

16:9 Wide

ENG-34		ENG-35

Setting Up the Audio Options