Samsung YP780V1/ELS manual Encoding MP3s

Encoding MP3s

1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line in cable.

2 If the	button is pressed, MP3 encoding begins.
● If the	button is pressed, encoding is paused and if the	button is pressed again,
the encoding resumes.

ENG

3 If the button is pressed during encoding, the encoding stops and an encod- ing file is created.

●Encoding is performed in order (ENC000001, ENC000002, etc.) and files are saved in the MP3 format after encoding.

Note :

●The bit rate can be set to 64Kbps, 96Kbps and 128Kbps.

●During encoding, there is no beeping sound and the button lights and backlight do not illuminate.

Notice :

●Do not disconnect the Line cable during Encoding.

●If the battery is not charged enough, encoding will not be done.

●Adjust the volume of the external audio source to a suitable level and encode it. If the volume level is extremely high, the sound quality may not be good.

34 35