Display Modes (HDMI/DVI Input)
Optimal resolution is 1366 X 768 @ 60 Hz. See specification page for full available resolution.
SERVICE
SERVICE
Connector for service only.
✎✎NOTE
•For HDMI/DVI cable connection, you must use the HDMI IN (DVI) port.
•If an HDMI to DVI cable is connected to the HDMI IN (DVI) port, the audio does not work.
•The interlace mode is not supported.
•The set might operate abnormally if a
•Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
•Connecting through the HDMI cable may not be supported depending on the PC.
•The headphone jack supports only the 3 conductor
Connecting to a COMMON INTERFACE slot
(Your TV viewing Card Slot)
To watch paid channels, the “CI or CI+ CARD” must be inserted.
• If you do not insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.
• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.
yy The image may differ depending on the model.
Changing the Input Source
Source
TV / Ext. / PC / HDMI/DVI / AV / Component
Use to select TV or other external input sources such as DVD /
✎✎Ext. and PC always stay activated. ✎✎Press the TOOLS button.
•Edit Name
You can set an external input sources name you want.
––When connecting a PC to the HDMI IN (DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
––When connecting a PC to the HDMI IN (DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.
––When connecting an AV devices to the HDMI IN (DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name.
•Information
You can see detailed information about the connected external device.
English
English - 7