Samsung BD-J6300/ZF, BD-J6300/ZG, BD-J6300/EN, BD-J6300/XN manual Wireless Network, Wps Pin

ĞĞWired - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:

1.	Select Network Status. The product
	searches for a network, and then displays the
2.	connection failed message.
	On the bottom of the screen, select IP
	Settings, and then press the v button.
3.	The IP Settings screen appears.
	Select the IP Settings field, and then press
4.	the v button.
	Select Enter manually in the IP Settings
5.	field, and then press the v button.
	Select a parameter to enter (IP Address, for
	example), and then press the v button.
	Use the number keypad on your remote
	control to enter the numbers for the
	parameter. You can also enter numbers using
	the ▲▼ buttons. Use the ◄► buttons on
	the remote control to move from entry field
	to entry field within a parameter. When done
6.	with one parameter, press the v button.
	Press the ▲ or ▼ button to move to another

Wireless Network

You can set up a wireless network connection in four ways:

-- Wireless Automatic -- Wireless Manual -- WPS(PBC)

-- WPS PIN

When you configure the wireless network connection, any wireless network devices currently connected through the product or, if applicable, the product's current wired connection, will be disconnected.

ĞĞWireless - Automatic

1.In the Home screen, select Settings, and then press the v button.

2.Select Network, and then press the

vbutton.

3.Select Network Settings, and then press the

vbutton.

4.Select Wireless in the Network Settings screen, and then press the v button. The product searches for and then displays a list of the available networks.

04 Settings

parameter, and then enter the numbers for

that parameter following the instructions in

Step 5.

7. Repeat Steps 5 and 6 until you have filled in

all parameters.

NOTE

\\ You can get the Network parameters from your Internet provider.

8. When finished entering all the parameters,

Network Settings

Select your network type.
Network type	Wireless
Wireless network
iptime23
iptime
solugen_edu#2

Refresh WPS(PBC)

You can connect your Blu- ray player to the internet. Please select which wireless network to use.

select OK, and then press the v button.

The product verifies the network connection

and then connects to the network.

5.Select the desired network, and then press the v button.

6.On the Security screen, enter your network's Security Code or Pass Phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button.

21 English