Samsung UE46ES8000SXXN, UE40ES8000SXTK, UE46ES8000SXXC manual Smart Touch Control / IR Blaster

SMART TV

QUICK SETUP GUIDE

Components • Smart Touch Control • IR Blaster

Smart Touch Control / IR Blaster

Smart Touch Control

Improved user convenience has been provided so that you can switch the channel and adjust the volume with just your fingertips while focusing on the TV screen. In addition, the built-in Touch Pad removes the need for a mouse when you change the menu settings and search for something on the Internet.

%For more detailed information about using the Smart Touch Control, refer to Smart Touch Control Guide (‹ → Support → Smart Touch Control Guide).

%Voice Control performance levels will vary based on the language spoken.

Installing batteries (Battery size: AA)

1 Press the back of the remote at the very bottom with both thumbs, and then slide the battery cover up in the direction of the arrow.

2

1	2 Install two batteries so that the polarity of the batteries (+/-) matches the
	illustration in the battery compartment.

3Slide the cover down in the direction of the arrow to close the battery cover.

IR Blaster

Connect the IR Blaster to the TV to control the external device with the Smart Touch Control.

If you set the Smart Touch Control to control the external device, the IR Blaster will send the IR Signal to an external device. Install the IR Blaster within 50 cm and 45 degrees in up, down, left and right from the IR sensor of the external device.

Installing batteries (Battery size : AA)

1

2	(
1"*3*/

1

		OPEN
OPEN
1"*3*/	(	1"*3*/	(
		OPEN
OPEN

1Hold the both sides of the battery holder and pull it out.

2Install four batteries so that the polarity of the batteries (+/-) matches the illustration in the battery compartment.

3Push it back.

Pairing Button

Power Switch	0/
	0''

OPEN

1"*3*/( 1

2

1

Device Indicator LED

IR Blaster shows the pairing state.

OPEN

BN68-04471F-01

English - 1