Samsung BD-J4500R/XE, BD-J4500R/EN, BD-J4500R/ZF manual System Settings

Digital Output Selection

	Setup		PCM	Bitstream	Bitstream	Bitstream
				(Unprocessed)	(Re-encoded DTS)	(Re-encoded Dolby D)
Connection			HDMI	HDMI Receiver	HDMI Receiver	HDMI supported AV
			Receiver			receiver
		PCM	Up to 7.1ch	PCM	Re-encoded DTS	Re-encoded Dolby Digital *
		Dolby Digital	PCM 2ch	Dolby Digital	Re-encoded DTS	Re-encoded Dolby Digital *
		Dolby Digital	PCM 2ch	Dolby Digital Plus	Re-encoded DTS	Re-encoded Dolby Digital *
Audio		Plus
Stream on		Dolby TrueHD	PCM 2ch	Dolby TrueHD	Re-encoded DTS	Re-encoded Dolby Digital *
Blu-ray
		DTS	PCM 2ch	DTS	Re-encoded DTS	Re-encoded Dolby Digital *
Disc
		DTS-HD High	PCM 2ch	DTS-HD High	Re-encoded DTS	Re-encoded Dolby Digital *
		Resolution Audio		Resolution Audio
		DTS-HD Master	PCM 2ch	DTS-HD Master	Re-encoded DTS	Re-encoded Dolby Digital *
		Audio		Audio
Audio		PCM	PCM 2ch	PCM 2ch	PCM 2ch	PCM 2ch
Stream on		Dolby Digital	PCM 2ch	Dolby Digital	Dolby Digital	Dolby Digital
DVD		DTS	PCM 2ch	DTS	DTS	DTS
			Decodes	Outputs only main	Decodes main
				feature audio	feature audio and
			main feature			Decodes main feature audio
				stream so that your	BONUSVIEW audio
			audio and			and BONUSVIEW audio
				AV receiver can	stream together into
Definition			BONUSVIEW			stream together into PCM
				decode the audio	PCM audio and add
for Blu-ray		Any	audio stream			audio and add Navigation
				bitstream.	Navigation Sound
Disc			together into			Sound Effects, then re-
				You will not hear	Effects, then re-
			PCM audio and			encodes the PCM audio into
				BONUSVIEW audio	encodes the PCM
			add Navigation	and Navigation	audio into DTS	Dolby Digital bitstream
			Sound Effects.
				Sound Effects.	bitstream

* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.

Blu-ray Discs may include three audio streams :

-Main Feature Audio : The audio soundtrack of the main feature.

-BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

-Navigation Sound Effects : When you choose a menu navigation selection, a Navigation Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.

✎NOTES

Be sure to select the correct Digital Output or you will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).

If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the player may output PCM 2ch downmixed audio even though you selected Bitstream (either Re-encoded or Unprocessed) in the setup menu.

If your TV is not compatible with PCM sampling rates over 48kHz, the player may output 48kHz downsampled PCM audio.

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.

•Auto : Automatically controls the dynamic range of Dolby TrueHD audio, based

on information in the Dolby TrueHD soundtrack.

Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus.

•Off : Leaves the dynamic range uncompressed, letting you hear the original sound.

•On : Turns dynamic range control on for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the player downmix to normal stereo or to surround compatible stereo.

System Settings

Setup

By using the Setup function, you can set the language, etc.

For more information about the Setup function, refer to the setup section of this user manual (See page 9).

Quick Start

You can turn on the power quickly by decreasing the boot time.

✎NOTES

If this function is set to On, Standby power consumption will be increased.

11