Appendix
Additional Information
Notes
Connections
HDMI OUT
●● Certain HDMI output resolutions may not work, depending on your TV.
●● A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
Settings
TV Aspect Ratio
●● Depending on the disc type, some aspect ratios may not be available.
●● If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, the picture might appear to be distorted.
●● If you select 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides of the picture).
BD Wise (Samsung Products only)
●● When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu.
●● If the product is connected to a device that does not support BD Wise, you cannot use the BD Wise function.
●● For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.
Digital Output
●● Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
●● If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.
●● Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
●● Some
●● This Digital Output setup does not affect the analogue (L/R) audio or HDMI audio output to your TV. It affects the optical and HDMI audio output when your product is connected to an AV receiver.
●● If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).
●● Digital Output can be activated when Speaker Selection is set to TV Speaker.
Anynet+
●● Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
●● This function is not available if the HDMI cable does not support CEC.
●● If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
●● In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.
●● Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster read/write speeds.
●● The Resume Play function may not work after you format the storage device.
●● The total memory available to BD Data Management may differ, depending on conditions.
DivX® Video On Demand
●● For more information about DivX(R) VOD, visit “http://vod.divx.com”.
Speaker Settings
●● When Speaker Selection is set to TV Speaker, audio is produced by the TV speakers.
HDMI audio
●● When HDMI audio is output to the TV speakers, it is automatically
Appendix