Samsung HTDB1750RH/EDC, HTDB1850RH/EDC Before Calling for Service, Picture does not appear, sound

Page 64

Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom

Check/Remedy

Disc tray does not open.

• Is the power cord plugged securely into the outlet?

 

• Turn off the power and then turn it back on.

 

 

 

 

 

 

 

 

 

Playback does not start.

• Check the region number of the DVD.

DVD discs purchased from abroad may not be playable.

 

• CD-ROMs and DVD-ROMs cannot be played on this DVD

 

player.

 

• Make sure that the rating level is correct.

 

 

 

 

 

 

 

 

 

Playback does not start

• Are you using a deformed disc or a disc with scratches on

immediately when the

the surface?

Play/Pause button is

• Wipe the disc clean.

pressed.

 

 

 

 

 

 

 

 

Sound is not produced.

• No sound is heard during fast playback, slow playback, and step

motion playback.

 

• Are the speakers connected properly? Is the speaker setup

 

correctly customized?

 

• Is the disc severely damaged?

 

 

 

 

 

 

 

 

 

Sound can be heard only

• When listening to a CD or radio, sound is output to the front

speakers (L/R) only. Select "PRO LOGIC II" by pressing

 

 

 

 

 

 

 

 

 

 

from a few speakers and

(Dolby Pro Logic II) on the remote control to use all six speakers.

not all six.

• Make sure that the DVD disc is 5.1-CH compatible.

• If you set C, SL, and SR to NONE in the speaker mode in the

 

audio setup of the setup screen, no sound is heard from the

 

center speaker and the front left and right speakers. Set C, SL,

 

and SR to SMALL.

 

 

 

 

 

 

 

 

 

Picture does not appear, sound

• Was the DVD player suddenly moved from a cold place to a warm

is not produced, or the disc

one? When condensation forms inside the player, remove the disc

and let the player stand for 1 or 2 hours with the power on. (You

tray opens 2 to 5 seconds later.

can use the player again after condensation disappears.)

 

 

 

 

 

 

 

 

 

Dolby Digital 5.1 CH

• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1

Surround Sound is not

CH Surround Sound is produced only if the disc is recorded with

5.1 channel sound.

produced.

• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in

 

the information display?

 

 

 

 

 

 

 

 

 

63

Page 63 Page 65
Image 64
Page 63 Page 65
Contents Digital Home Cinema System Safety Warnings Class 1 Laser ProductPrecautions PreparationFeatures Multi-Disc Playback & AM/FM TunerContents Copy Protection Disc SizeMark Logo Max. Playing TimeDisc Recording Format Description Video Output Connector Channel SpeakerRemote Control Replace the battery cover Insert Remote BatteriesConnecting the Speakers Selecting the Listening PositionConnect the connecting jacks to the back of the DVD player Back of the SpeakersPlease observe the following cautions for your safety Connect the FM antenna supplied to the FM 75ΩConnecting the Video to TV Connecting External Components Connecting an External Digital ComponentConnecting an External Analog Component Press AUX on the remote control to select AUX 1 or AUXPress the Mode Button so that Press TV/VIDEO button to select Video modeDVD Receiver indicator on the remote control flashes Selecting the Video FormatPress OPEN/CLOSE button to open the disc tray Load a discs Disc PlaybackTo stop playback Press Stop during playback Displaying Disc Information Press Info buttonChecking the Remaining Time Press the Remain buttonPress and hold Fast/Slow PlaybackPress Slow button Skipping Scenes/Songs Briefly pressRepeat Playback Press Repeat buttonPress Info button twice Press Enter buttonPress Enter Press Info button twiceA-B Repeat function will not work on an MP3 or Jpeg disc Angle Function Press CursorZoom Function Press ZoomButton Press EZ View button1Press Info button twice Press Info button Press CursorTwice Subtitle display1Press Info button Press Cursor , buttonsTime display Chapter displayUsing Disc Menu Press Cursor Buttons to Press EnterSelect the desired PBC Playback Control FunctionUsing the Title Menu Press Menu button to exit the setup screenPress Menu Button to move toSetting the Language ‘Setup’ and thenPress Enter button Button to move toPress Enter Press Cursor Press Enter buttonPress Cursor 2 button to move to ‘Setup’ and then Setting TV Screen typePress Cursor 3 button to move to ‘TV Letterbox Adjusting the TV Aspect Ratio Screen Size43 Pan&Scan Setting Parental Controls Rating Level Press Cursor , button Enter the passwordPress Cursor 3 button to move to Setting the Password Press Cursor Button to move to Press Menu buttonEnter the password Button Enter buttonSetting the Wallpaper Jpeg DVD VCD 1PLAY/PAUSE button when the image you like comes upDuring playback, press Press Cursor 6 button to move to ‘USER’ and thenButton to open and then ‘Setup’ and thenPress Enter button Setting the Speaker Mode SpeakerPress Enter button Press Cursor Speaker and then press Enter buttonSetting the Test Tone ‘Audio’ and thenPress Test Tone button Press Cursor buttonPress Cursor button Setting the Delay TimePress Menu button to move to ‘Audio’ and then press Enter 3to move to ‘DELAY TIME’ and then press Enter button Press Cursor , 5 totime.set the DelaySetting Center Speaker Setting Rear Surround SpeakersYou can adjust the balance and level for each speaker Setting the Audio QualityEnter button Press Cursor button Method 2 When manually adjusting with the Sound Edit button Press SoundSetting the DRC Dynamic Range Compression To adjust the ‘DRC’.Press Cursor ‘DRC’ and then press Enter buttonTo Turn On or Off Sound Logo Press and hold ASC buttonBriefly press ASC button Press and hold ASC button twiceAdjust the volume control on the main Unit as follows When the message Remove MICPlug the auto sound calibration Press ASC buttonLive Surround Mode Function Live Surround ModePress SUPER5.1 Virtual Headphone Function PlugPress PL II Mode button Dolby Pro Logic II ModeYou can select the desired Dolby Pro Logic II audio mode Press PL II Mode Button to select ‘MUSIC’ modeDolby Pro Logic II Effect Press PL II Effect buttonRemote Control Unit Press Tuner Listening to RadioBand button Main UnitPresetting Stations What information can RDS signals provide? Using the RDS Radio Data System to receive FM stationsAbout RDS broadcasting PTY Program Type indication and PTY-SEARCH function PTY Search is only applicable to preset stationsBefore you start, remember To confirm the sleep timer setting, press Sleep button Convenient FunctionsPress Sleep button OFF appears on the displayPress Dimmer button Press Mute buttonOperating the TV with the Remote Control While holding down POWER, enter the codeTV Brand Code List Brand CodePicture does not appear, sound Before Calling for ServiceTray opens 2 to 5 seconds later Check/Remedy Using the Reset function will erase all stored settingsMain unit is not working Disc Storage Handling discsHandling and Storing Discs 1ch speaker system SpecificationsSubwoofer speaker Weights 1ch speaker system296 x 390 x 360 mm 2KgBe chosen from the menu displayed on the TV monitor DVD player, the player cannot play the discSubtitle languages Movies, these movies are numbered as Title 1, Title 2, etcREV02 AH68-01286B
Related manuals
Manual 35 pages 6.36 Kb Manual 35 pages 54.67 Kb Manual 35 pages 39.72 Kb Manual 35 pages 15.53 Kb
Top Page Image Contents