Samsung HTDL70D manual Listening to the Radio, Presetting stations, To Listen in Mono/Stereo

Listening to the Radio

You can listen to the chosen band (FM, MW or LW broadcast stations) by using either the automatic tuning or manual tuning operation.

GB

Presetting stations

You can store up to:

15	FM stations	• FM	Frequency Modulation
8 MW stations		• AM(MW)	Medium Wave
7	LW stations	• LW	Long Wave

GB

1

2

Example: Presetting FM 89.1 in the memory

Remote

Control

Unit

Press the Tuner(Band) button.

• The selection toggles back

and forth between "FM" "MW"

and "LW" each time the

Select a broadcast station.

	When the	button is pressed, a preset
Auto Station 1
	broadcast station is selected.

1

Press the Tuner(Band) button and select the FM band.

2

Select MANUAL by pressing the Stop ( ) button on the main unit.

3

Use the ▲▲ and ▲▲ button to tune to 89.1

Tuner(Band) button is

pressed.

Auto Station 2	Hold in the	button. Automatic searching
	begins, and then stops when a station is tuned in.
Manual Station Press the		button to tune to the chosen

station. The frequency changes incrementally in either direction each time the corresponding button is pressed.

•The selection toggles back and forth between “ ” each time the Tuner(Band) button is pressed.

MHZ MHZ

L R L R L R

Main Unit

1

Press the Function button to select the desired band (FM, MW or LW).

2

Select a broadcast station.

Auto Station 1	Press the Stop (	) button to select the PRESET
	mode. Then press the		button to select a

station stored in the preset. See the instructions on the next page to preset stations.

4

Press the Program button on the remote control, FM1 will flash. If you want to save 89.1 to FM1, press Program again.

PROGRAM MHZ

L R

5

If you want to save 89.1 to another preset location(FM2~FM15), press ▲▲ or ▲▲, then press Program to save it to that location.

	PROGRAM	MHZ
L	R

6

To preset other stations, follow steps 1~4 again.

Auto Station 2 Press the Stop ( ) button to select the MANUAL mode on the front panel. Then hold in the button to make the unit begin automatically searching for

broadcast stations.

	MHZ
L	R

To Listen in Mono/Stereo

Press the MO/ST button. (FM only)

Manual Station

Audio

MO/ST

Press the Stop ( ) button to select the MANUAL mode

on the front panel. Press the button to tune to the desired station. The frequency changes incrementally in either direction each time the corresponding button is pressed.

To store other Channels	To tune in a preset station
• Follow steps 3~5 again.	• See the previous page.

•The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed.

•In a poor reception areas, select Mono mode for a clear, interference-free broadcast.

37 38