System setup
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Centre and Rear Speakers.
Setting Centre SPEAKER
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance |
|
|
|
|
|
|
between | 0.00 m | 0.34 m | 0.68 m | 1.06 m | 1.40 m | 1.76 m |
Df and Dc |
|
|
|
|
|
|
|
|
|
|
|
|
|
Delay Time | 0 ms | 1 ms | 2 ms | 3 ms | 4 ms | 5 ms |
|
|
|
|
|
|
|
Setting REAR SPEAKER
If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance |
|
|
|
|
|
|
between | 0.00 m | 1.06 m | 2.11 m | 3.16 m | 3.62 m | 5.29 m |
Df and Dc |
|
|
|
|
|
|
|
|
|
|
|
|
|
Delay Time | 0 ms | 3 ms | 6 ms | 9 ms | 12 ms | 15 ms |
|
|
|
|
|
|
|
Ideal Centre SPEAKER
placement
Ideal
REAR SPEAKER placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from Centre SPEAKER
Dr: The distance from REAR SPEAKER
MM `` With 
PL II (Dolby Pro Logic II), the delay time may be different for each mode. `` With
`` The Centre channel is only adjustable on 5.1 channel discs.
44