Samsung HTDB760RH/ELS, HTDB760RH/EDC, HT-DB760 manual Disc Recording Format

Page 7

1p~32p(DB760)-GB 1/3/04 4:38 PM Page 9

Disc Recording Format

CD-R Discs

Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs may not be playable.

Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.

If possible, do not use CD-RW (Rewritable) media, as they may not be playable.

Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc.

CD-R MP3 Discs

Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.

MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).

Use discs recorded with a compression/decompression data rate greater than 128Kbps.

Only files with the ".mp3" and ".MP3" extensions can be played.

Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment.

If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.

For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.

If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.

If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.

What is MP3?

MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3 format to record about 12 times the usual amount of data on a regular CD.

CD-R JPEG Discs

Only files with the ".jpeg" and ".JPEG" extensions can be played.

If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.

Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.

JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).

Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment.

A maximum of 9,999 images can be stored on a single CD.

When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.

Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.

Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992 –1997 Dolby Laboratories, Inc. All rights reserved.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. ©1996 Digital Theater Systems, Inc. All rights reserved.

PREPARATION

6

Image 7
Contents Digital Home Cinema System Class 1 Laser Product Safety WarningsPreparation PrecautionsMulti-Disc Playback & AM/FM Tuner FeaturesContents Copy Protection Playable DiscsDisc Recording Format Speaker indicator Indicator PRO Logic II indicatorDescription Channel Speaker Video Output ConnectorDVD Receiver indicator Mode button DVD button AUX button TV indicatorSLOW, MO/ST button Rrss button Insert Remote Batteries Position of the DVD Player Selecting the Listening Position Connecting the SpeakersBack of the Speaker Screws B as shown in the illustration Mounting the Speakers to a WallComposite Video Good Quality Connecting the Video to TVFM antenna connection Connecting the AntennasAntennanot supplied AMMW/LW antenna connectionConnecting an External Digital Component Connecting External ComponentsPress AUX on the remote control to select AUX 1 or AUX Connecting an External Analog ComponentSelecting the Video Format Press the Mode Button so thatPlug the power cord into the AC power supply Press DVD button to select DVD/CD modeTo stop playback Press Stop during playback Disc PlaybackDisc tray Load a discsPress Info button Displaying Disc InformationPress the Remain button Checking the Remaining TimePress and hold Fast/Slow PlaybackPress Slow button Briefly press Skipping Scenes/SongsPress Repeat button Repeat PlaybackPress Enter Press Info button twiceButton at the end of the desired segment Press Cursor Angle FunctionPress Info button button to move to Angle display Press EZ View button Zoom FunctionPress Zoom ButtonButtons to select the desired subtitle 1Press Info button twicePress Info button Press Cursor Button to move to Twice Subtitle displayMoving Directly to a Scene/Song PBC Playback Control Function Using Disc MenuButtons to Press Menu buttonButton ‘Title Menu’ Using the Title MenuPress Menu button to exit the setup screen Press MenuSetting the Language Button to select Press Enter Press CursorDISPLAY’ and then Setting TV Screen typePress Enter button Letterbox Adjusting the TV Aspect Ratio Screen Size43 Pan&Scan Setting Parental Controls Rating Level Press Cursor , button Enter the passwordPress Cursor Button to move to Press Menu button Setting the PasswordPress Cursor button to Button Enter buttonThen press 1PLAY/PAUSE button when the image you like comes up Setting the Wallpaper Jpeg DVD VCDDuring playback, press Press Return button to return to the previous level ‘Setup’ and thenButton to move to ‘LOGO’ and thenButtons to move 4 to the desired Setting the Speaker ModeSpeaker Press Enter button Press CursorTo move to ‘TEST Setting the Test Tone‘Audio’ and then Press Test Tone buttonPress Cursor button Setting the Delay TimeSetting Rear Surround Speakers Setting Center SpeakerEnter button Press Cursor button Setting the Audio QualityPress Sound Method 2 When manually adjusting with the Sound Edit button‘Audio’ and then Setting the DRC Dynamic Range Compression‘DRC’ and then press Enter button To adjust the ‘DRC’.Press CursorPress PL II Mode button Dolby Pro Logic II ModeDolby Pro Logic II Effect Press PL II ModeButton to select ‘MUSIC’ mode Then press Cursor , buttons to select the modeSetting the RRSSRear Reflecting Surround System Next,briefly press the Rrss button To cancel the Rrss setupBriefly press the Rrss button Press and hold the Rrss buttonTo cancel the rear What is RRSS?To cancel the magic sound field Live Surround ModeEach time you press the LSM + Function, press the SURR. Plus button again To cancel the surround plusFunction, press the Super 5.1 button to select Super OFF To cancel thisSuper Press the Super Button to selectMain Unit Remote Control Unit Press TunerListening to Radio Band buttonPresetting Stations What information can RDS signals provide? Using the RDS Radio Data System to receive FM stationsAbout RDS broadcasting Before you start, remember PTY Program Type indication and PTY-SEARCH functionConvenient Functions To confirm the sleep timer setting, press Sleep buttonPress Sleep button Press Mute button Press Dimmer buttonPoint the remote control toward the TV When operating the TV with the remote controlPress the Mode button to make the TV Indicator on the remote control to flashBrand Code TV Brand Code ListTray opens 2 to 5 seconds later Before Calling for ServicePlay/Pause button is pressed Picture does not appear, soundMain unit is not working Using the Reset function will erase all stored settingsDo not use this unless necessary Disc Storage Handling discsHandling and Storing Discs 1ch speaker system SpecificationsNumber Memo AH68-01365B
Related manuals
Manual 74 pages 6.39 Kb