DVD Audio Disc Playback Mode
Some
To play back the
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
GB
Press the MENU
1 button while the disc tray is open.
Press Cursor 3 button to move to
‘DVD TYPE’ and then press ENTER button.
Press Cursor 2 button to move to
‘Setup’ and then press ENTER button.
Press Cursor , 4 button to move to
‘DVD VIDEO’ and then press ENTER button.
•Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
•DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
•DVD AUDIO : set to play the default DVD audio.
In Stop mode,
1 press MENU
button.
In the Speaker
3 Setup, press the ENTER button again.
Press Cursor 2 button to move to
‘Audio’ and then press ENTER button.
Press Cursor , ,
4 , buttons to move to the desired speaker and then press ENTER button.
•For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE.
•For L and R, the mode is set to SMALL.
SETUP
Note |
DivX (R) registration | • DVD Play mode is set to DVD |
Audio as factory default setting. |
•Please use the Registration code to register this player
47 | with the DivX (R) video on demand format. To learn more, | |
go to www.divx.com/vod. | ||
|
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
Note |
•• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 57).
48