Samsung HT-E6750W/EN, HT-ES6200/XN Enter numbers by pressing the number buttons on your remote

Settings

Initial Settings > Network Settings (4/5)
Enter security key.							0 entered		WPS PIN
-
a	b	c	d	e	f	1	2	3	Previous
g	h	i	j	k	l	4	5	6	Next
m	n	o	p	q	r	7	8	9	Skip
s	t	u	v	w	x	y	z	0
	A/a			Space				

8 . Enter your network's security key. When done, use the ▲▼◄► buttons to select Next, and then press the Ebutton.

NOTE

￿Enter numbers by pressing the number buttons on your remote.

￿Enter letters by selecting a letter using the ▲▼◄► buttons, and then press Ebutton.

￿To display capital letters (or redisplay small letters if capital letters are displayed), select A/a, and then press the Ebutton.

￿To display symbols and punctuation, select , and then press the Ebutton. To redisplay letters, select , and then press the Ebutton.

9 . If the connection is successful, the Connection Complete screen appears. Select Next, and then press the Ebutton. The Software Update screen appears.

NOTE

￿If the connection is not successful, select Next, and then press the Ebutton. After you have completed the Initial Settings procedure, go to "Wireless Network" on page 33 to set up the product's wireless network connection.

10 . To upgrade the software, select Update now, and then press the Ebutton. To skip the upgrade, select Update later, press the Ebutton, and go to Step 12.

NOTE

￿If you skipped network set up, you must skip software upgrade also.

24 English

11 . If there is a software upgrade available, the product downloads and installs the upgrade. This can take some time. If there is no software upgrade available, the "There are no new software updates for you to download. You already have the most up to date version." message appears. And then press the Ebutton. The TV Aspect Ratio screen appears.

Initial Settings > TV Aspect Ratio

Set to match the type of television connected.

16:9	Original
16:9	Full

4:3 Letter Box	Select when connecting to a	Previous
		Next
	16:9 TV Screen. All content
4:3 Pan-Scan	will be displayed at original
	aspect ratio. Content
	formatted in 4:3 will be
	displayed with black bars on
	left and right.

12 . Using the ▲▼ buttons, select the aspect ratio that matches your screen, and then press the Ebutton. Select Next, and then press the

Ebutton.

You have four choices:

16:9 Original - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.

16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen analogue TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.

4:3 Pan-Scan - For older, standard screen analogue TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.

HT-E6750W_XU_0223.indd 24 2012-02-23 오후 4:41:25