Samsung HT-P70NR/ELS manual Dolby Pro Logic II Mode, Press PL II Mode, Press PL II Effect button

Dolby Pro Logic II Mode

You can select the desired Dolby Pro Logic II audio mode.

This function works only in Dolby Pro Logic MUSIC mode.

Press PL II MODE button.

• Each time the button is pressed, the mode changes as follows.

mode.

Press PL II EFFECT button

2 to select Panorama, then press Cursor , buttons to select the desired effect setting.

•You can select either 0 or 1.

•This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.

Press PL II EFFECT button

3 to select C-Width, then press Cursor , buttons to select the desired effect setting.

•You can select between 0 and 7.

•This sets the width of the center image.

The higher the setting, the less sound comes from the center speaker.

Press PL II EFFECT button

4to select Dimension, then press

the Cursor , buttons to select the desired setting.

•You can select between 0 and 6.

•Incrementally adjusts the sound field (DSP)from the front or rear.

SETUP

PRO LOGIC II

•MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.

•CINEMA: Adds realism to the movie soundtrack.

•PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left and right speakers.

•MATRIX: You will hear 5.1 channel surround sound.

STEREO: Select this to listen to sound from the front left and right speakers and the subwoofer only.