Symptom |
| Check/Remedy |
The AllShare connection | • | IP address under the same subnetwork should be unique, otherwise IP collision can |
between the product and | • | results in such a phenomenon. |
PC is unstable. | Check if you have a firewall enabled. | |
|
| If so, disable the firewall function. |
|
|
|
I cannot connect to the | • | Test whether the network connection is active by using the Network Status |
• | function. | |
| Check whether a USB memory device is connected to the product. | |
| • | The memory device must have at least 1GB of free space to accommodate the |
|
|
|
| • | You can check the available size in BD Data Management. (See page 51) |
| See if the | |
| • | If all above fails, contact the contents provider or update to the latest firmware. |
When using the | • | The memory device must have at least 1GB of free space to accommodate the |
service, an error occurs. |
| |
|
| You can check the available size in BD Data Management. (See page 51) |
NOTES
When the factory default settings are restored, all stored user BD data will be deleted.
Hereby, Samsung Electronics, declares that this Home Cinema System is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
This equipment may only be used indoors.
07 Appendix
English 57