Samsung PPM50M7HSX/EDC, PPM42M7HSX/EDC manual Setting the Screen Burn Protection Timer

Setting the Screen Burn Protection Timer

You can set the timer for Screen Burn Protection (hours, minutes). If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish.

1Press the MENU ( ) button.

Result: The main menu is displayed.

2Press the … or † button to select Function.

Result: The Function menu is displayed.

3Press the ENTER ( ) button.

4Press the … or † button to select Screen Burn Protection. Press the ENTER ( ) button.

5Press the … or † button to select Timer. Press the ENTER ( ) button.

Result: The Timer menu is displayed.

6Press the ENTER ( ) button again.

7Select On by pressing the … or † button. Press the ENTER ( ) button.

8Select the required option by pressing the … or † button.

Result: The following options are available.

◆Mode : All White, Signal Pattern, Inverse, Bar, Bar & Inverse

◆Period : Hour(1~24)

◆Time : Minute(1~30)

9Press the EXIT button to exit.

Screen Burn Protection

Pixel Shift

All White

Signal Pattern

Inverse

Bar

Bar & Inverse

Timer

Move		Enter				Return
	Timer
Timer	: Off			Off
Mode	: Signal Pattern
					On
Period	: 1			Hour
Time	: 30 min.
Move		Enter				Return
	Timer
Timer	: On
Mode	: Signal Pattern
			All White
Period	:			01	Hr.
			Signal Pattern
Time	:			05 min
				Inverse
				Bar
			Bar & Inverse
Move		Enter				Return
	Timer
Timer	: On
Mode	: All White
				▲
Period	:			01
Time				▲
	: 30 min.
Move		Enter				Return
	Timer
Timer	: On
Mode	: All White
Period	: 1			Hour
				▲
Time	:			30

▲

Move Enter Return

English - 31