![](/images/new-backgrounds/1162645/16264535x1.webp)
The display area suddenly moves to an edge or to the center.
Did you change the graphics card or the driver? | Please press the [AUTO] button to run the auto adjustment |
| function. |
|
|
Did you change the resolution and frequency appropriate to | Set the resolution and the frequency to the appropriate values |
the product? | in the graphics card |
| Refer to the (Standard Signal Mode Table) |
|
|
Is the graphics card configured correctly? | Set up the graphics card referring to the user manual. |
|
|
The pictures are | |
|
|
Did you change the resolution and the frequency appropriate | Set the resolution and the frequency to the appropriate values |
to the product? | in the graphics card |
| Refer to the (Standard Signal Mode Table) |
|
|
The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card. | |
|
|
Did you install the device driver for the product? | Windows ME/XP/2000 : Set the color again by selecting Con- |
| trol Panel → Display → Settings. |
|
|
Is the graphics card configured correctly? | Configure the color again in accordance with the new graph- |
| ics card driver. |
|
|
When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed.
Did you install the device driver for the product? | Install the device driver referring to the descriptions about the |
| driver installation. |
|
|
Check if all the Plug&Play (VESA DDC) functions are sup- | Install the device driver referring to the descriptions about the |
ported referring to the User Manual of the graphics card. | driver installation. |
|
|
A “beep, beep” sound is heard when booting the computer.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
| Problems related to Audio | |
|
|
|
No sound |
| Ensure that the audio cable is firmly connected to both the |
|
| |
|
| sound card. |
|
| Check the volume level. |
|
|
|
Sound level is too low. |
| Check the volume level. |
|
| If the volume is still too low after turning the control to its max- |
|
| imum, check the volume control on the computer sound card |
|
| or software program. |
|
|
|