Samsung LH40MRTLBC/XY BNC OUT R, G, B, H, V BNC Terminal Output, LAN LAN Connection Terminal

Introduction

your digital output device using a HDMI ca- ble.

Up to HDMI cable 1.0 can be supported.

BNC OUT [R, G, B, H, V] (BNC Terminal (Output))

BNC (Analog PC) Connection: connecting the R, G, B, H, V ports.

The number of LCD Displays that can be connected to the loopout depends on the ca- bles, signal source, etc. With cables or signal source where there is no degradation, up to 10 LCD Displays can be connected (May not be supported depending on the connected cable).

Note

(Applicable to the UX-2 model only)

(BNC/Component Connection Terminal (input))

During component input, please check spec- ifications for the input ports below.

[R/Y, G/PB, B/PR, H, V]

•[R/Y] --> Red port input

•[G/PB] --> Green port input

•[B/PR] --> Blue port input

Note

Applicable to the UX-2 model only.

RGB OUT

Note

Applicable to the UXN-2 model only.

LAN (LAN Connection Terminal)

Note

Applicable to the UXN-2 model only.

USB1,USB2 (USB Connection Terminal)