3-3 LED Indications
3-3-1. LED Indications
: Light is Off / 
: Light is Blinking / 
: Light is On
LED | STATUS |
|
|
The battery is being charged.
The battery is completely charged.
The projector shut down automatically because it exceeded the maximum operating temperature. (The LED blinks at one second intervals.)
Refer to Action 1 in Clearing Indicator Problems below.
The cooling system (including the cooling fan) inside the projector is not working normally. (The LED blinks twice at one second intervals and then stays off for two seconds.)
Refer to Action 2 in Clearing Indicator Problems below.
The LED
Refer to Action 3 in Clearing Indicator Problems below.
The battery needs to be charged.
3-3-2. Clearing Indicator Problems
CLASSIFICATION | STATE | MEASURES | |
|
|
| |
Action 1 | The internal temperature of the | • Restart the projector. If the same problem occurs continually, | |
projector increased abnormally. | contact your product distributor or service center. | ||
| |||
|
|
| |
| The cooling system (including the | • Move the projector to a cool place, let it cool sufficiently, and then | |
Action 2 | cooling fan) inside the projector is | turn it on again. If the same problem occurs continually, contact | |
| not working normally. | your product distributor or service center. | |
|
|
| |
Action 3 | The LED | • Restart the projector. If the same problem occurs continually, | |
projector is not working normally. | contact your product distributor or service center. | ||
| |||
|
|
|
This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may produce noise, This does not affect product performance and is part of normal operation.
Using |