Radio Shack TRC-511 owner manual Installation, Mounting the Microphone Holder, Mounting the CB

Page 5

21-1705.fm Page 5 Thursday, September 7, 2000 10:41 AM

ˆInstallation

MOUNTING THE MICROPHONE HOLDER

You can mount the microphone holder on ei- ther side of the CB or at another location near your receiver.

Warning: Do not mount the CB microphone holder where it could damage or interfere with the operation of any passive restraint safety device (an air bag or seat belt).

To mount the holder to either side of the CB, use the two supplied 1/8-inch (3-mm) tapered-tip screws, plain washers, and spring washers (as shown) to secure the holder.

To mount the holder near the receiver in an- other location in your vehicle (such as a dashboard), or somewhere in your home or office, such as a nearby wall, follow these steps.

1.Using the holder as a template, mark the positions for the screw holes at the desired location.

2.At each marked position, drill a pilot hole slightly smaller than the mounting screws.

Caution: Be careful not to drill into any- thing behind the mounting surface.

3.Mount the holder using the machine screws, spring washers, plain washers and nuts.

Mounting Surface

Note: If you cannot reach behind the mount- ing surface to attach the nuts to the machine screws, use the two supplied 1/8-inch (3-mm) tapered-tip screws and plain washers.

MOUNTING THE CB

The most common mounting location for this CB is under a vehicle’s dashboard. However, if you use the CB as a base station in your home or office, you can place it on a desk, shelf, or table (see “Using the CB as a Base Station” on Page 7).

If you are mounting the CB in a vehicle, choose a location where:

•you can easily reach the CB

•wires and cables are clear of the vehi- cle’s pedals and other moving parts

•the CB is not directly in front of heating vents

•all wires and cables can reach their con- nection point

Installation

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents TRC-511 40-Channel Mini-Mobile CB Radio Contents Features FCC Information Mounting the CB InstallationMounting the Microphone Holder Antenna Connecting AN AntennaUsing the CB AS a Base Station Connecting MicrophoneUsing Vehicle Battery Power Fm Page 8 Thursday, September 7, 2000 1041 AM Operation Receiving Transmissions and Adjusting SquelchTransmitting Selecting AN Emergency ChannelOperational Hints Using Common 10-CODESCommon Uses for a CB Transmission CourtesyCode Meaning Maximum RangeReducing Noise Symptom Solutions TroubleshootingReplacing the Fuse Care and MaintenanceReceiver SpecificationsVised of the Possibility of Such Damages Limited Ninety-Day Warranty

TRC-511 specifications

The Radio Shack TRC-511 is a notable model in the world of two-way radios that debuted in the early 1980s. This compact yet powerful device is designed for personal use and is particularly popular among hobbyists, outdoor enthusiasts, and professionals who require reliable communication over short distances. The TRC-511 exemplifies Radio Shack's commitment to delivering quality electronics to the consumer market.

One of the main features of the TRC-511 is its 40-channel operation, which allows users to choose from a wide range of frequencies. This ensures clear communication while minimizing interference from other devices. The radio operates in the Citizens Band (CB) frequency range, making it accessible for anyone without the need for a license. This user-friendly aspect has made the TRC-511 a go-to choice for both novice and experienced radio operators.

Another key characteristic of the TRC-511 is its compact and lightweight design, which enhances portability. Weighing in at only a few ounces, it can be easily carried in a pocket, backpack, or mounted in a vehicle. The TRC-511 is equipped with a built-in antenna that provides adequate range for typical short-distance communication, making it perfect for outdoor activities such as camping, hiking, and off-roading.

The radio features a clear and easy-to-read LCD screen, displaying the selected channel and signal strength. Ergonomic controls ensure that users can quickly adjust settings without fumbling, even in challenging environments. Built-in noise reduction technology enhances audio clarity, allowing for seamless conversations even in noisy settings. Additionally, the TRC-511 comes with integrated scanning capabilities, enabling the user to locate active channels effortlessly.

Battery life is another strong suit of the TRC-511. Designed to operate on standard AA batteries, it offers a reliable runtime, making it a dependable option for extended outings. Some versions also support rechargeable battery packs, catering to users looking for eco-friendly solutions.

In summary, the Radio Shack TRC-511 is a versatile, user-friendly two-way radio that combines essential features, portability, and quality audio performance. Its 40 channels, compact design, built-in technologies, and reliable battery life make it an excellent choice for anyone in need of effective communication. Whether for recreational use or professional applications, the TRC-511 remains a commendable option in the landscape of two-way radio systems.
Top Page Image Contents