Samsung SP2503SWX/EN, SP2203SWX/EN, SP2003SWX/EN, SP2203SWX/XV manual Remote Control

3-3 Remote Control

Using your projector with another remote control device nearby may result in improper functioning due to remote control code (frequency) interference.

1.POWER ( ) Button

Use this button to turn the product on and off.

2.AUTO Button

Adjusts the Picture automatically. (Available in <PC> Mode Only)

3.MENU ( ) Button

Use to display the Menu Screen.

4.Move ( )/ ( ) Buttons

Use to move to or select each menu item.

5.V. KEYSTONE Button ( )

Use to correct the screen shape when the screen is displayed as a trapezoid.

6.INSTALL Button

Use to adjust the image so that it is appropriate for the projector's installation location (In front of the screen and hangng from the ceiling, behind the screen and hanging from the ceiling, etc.)

7.BLANK Button

Use to turn off the screen and sound temporarily. The video and audio will come back on when any button other than the [POWER] button is pressed.

8.P.SIZE Button

Use to adjust the size of picture screen.

9.QUICK Button

Use to return to the last menu used quickly.

10.MUTE ( ) Button

Press to mute the sound temporarily. Press the MUTE button again or the

VOL button ( ) when the sound is muted to hear sound again.

11.RETURN ( ) Button Returns to the previous menu.

12.EXIT ( ) Button

Use to make the Menu Screen disappear.

13.VOL ( ) Button

Use to control the volume.

14.INFO Button

Use to check source signals, picture setup, PC screen adjustment, and lamp lifespan.

15.SOURCE Button

Use to check or select the connection status of external devices.

16.P.MODE Button

Use to select Picture Mode.

17.STILL Button

Use to see still images.

Make sure to place your remote control on a table or desk.

If you step on the remote control, you may fall and hurt yourself or damage the remote.

You can use the remote control up to a distance of about 32.8 feet (10 m) from the product.

Using 3-3