Samsung SP2553XWCX/EN, SP2253XWCX/EN, SP2553XWCX/NG manual Connecting a PC using an HDMI/DVI cable

2-11 Connecting a PC using an HDMI/DVI cable

2-11-1. Connecting a PC using an HDMI/DVI cable

Make sure that your PC and projector are turned off.

1.Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied).

-If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied).

-For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-8, "Supported Display Modes".

2-11-2. Configuring the Audio Settings for Your PC

When the projector is connected to the PC via an HDMI cable, you can change the audio settings as follows:

1.In Category View of Windows XP : Go to Control Panel - [Sounds, Speech and Audio Devices], and select <Speaker Settings>.

2-11 Installation and Connection