Adjusting the LCD Display
Multi Control
Assigns an individual ID to the SET.
MENU → → → → → ENTER → → ENTER
→ , → [0~9]
•ID Setup
Assigns distinctive IDs to the SET.
•ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
• PC / DVI
• AV
• HDMI
• MagicInfo
• TV
Note
•The TV menu is available when a TV tuner box is installed.
•UT model can use MagicInfo menu when mounted Network box.
Note
•For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using a separate USB keyboard.
•For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the LCD Display turns on.
•Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop. If you do unplug the cable, restart the system.
•Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop.