Samsung PH42KLPLBC/XV, PH50KLPLBC/EN DVI / PC / Hdmi in Hdmi, AV in Video, AV Audio in L- Audio R

Introduction

Note

The number of PDP Displays that can be connec- ted to loopout may differ depending on the cables, signal source etc. With cables where there is no degradation or signal source, up to ten PDP Dis- plays can be connected.

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO IN] (PC/DVI/HDMI Audio Connection Terminal (Input))

DVI / PC / HDMI IN [HDMI]

Connect the HDMI terminal at the back of your PDP Display to the HDMI terminal of your digital output device using a HDMI cable.

DVI / PC / HDMI IN [RGB](PC Video Con- nection Terminal)

Using a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC)

DVI / PC / HDMI IN [DVI] (PC Video Con- nection Terminal)

Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC)

DC Power [OUT]

Connect this to the POWER connector of a TV tuner box or network box.

AV IN [VIDEO]

Connect the [ VIDEO ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable.

AV AUDIO IN [L- AUDIO - R]

Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ L- AUDIO - R ] port of the PDP Display.