|
| AUTO POWER |
| ||
| REPEAT |
| DIMMER | ||
|
|
| OPTICAL | USB/ | TV SOURCE |
|
| AUX | |||
|
|
| AUTO POWER SoundShare | ||
|
|
|
| ||
REPEAT
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn on the TV or any device connected to the Air Track with the optical cable.
Press AUTO POWER on the remote control of this unit.
• The Auto power link function turns on and off each time you press AUTO POWER.
AUTO POWER LINK | Display |
ON | POWER LINK ON |
OFF | POWER LINK OFF |
ENG
●
AUTO POWER
▪ If a TV or any device connected to Air Track with the optical cable is off and there is no digital input, the Air Track is turned off after 20 minutes.
Using the DIMMER function
FUNCTIONS
REPEATDIMMER
|
| TV MUTE | TV INFO TV | |
|
|
| SOUND EFFECT | SMART VOLUME |
|
|
|
| |
|
|
| ||
|
|
| TV VOL | TV CH AUDIO SYNC |
|
|
| ||
| LEVEL | MUTE | LEVEL | ||
|
|
| |||
|
|
|
|
| |
|
|
|
| ||
3D SOUND |
| VOL | DRC | ||
| PLUS |
|
|
|
|
This feature control the brightness of the Display.
Press DIMMER on the remote control of this unit.
Each time the button is pressed, the selection changes as follows :
DIMMER ON ➡ DIMMER OFF
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Air Track is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.
Press AUDIO SYNC
•You can use the + , - buttons to set the audio delay time between 0 ms and 300 ms.
▪ In USB mode TV mode or BT mode, the Audio Sync function may not work.
Using the DRC function
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Press DRC on the remote control of this unit.
•Each time the button is pressed, the selection changes as follows :
DRC STANDARD ➡ DRC MAX ➡ DRC MIN
19