Samsung manual Installing the SOC-320P

Page 5

Installing the SOC-320(P)

Installing the SOC-320(P)

1. Find a suitable place for installing the camera. (Must be able to bear five times

Ethe weight of the camera [approx. 1Kg])

2. Install the Mounting Bracket provided at the desired location, and assemble the camera onto the bracket. Then connect the cable to the RJ-45 connector.

3.Plug the other end of the cable that is connected to the camera into the monitor.

4.Use the Handle on the Mounting Bracket when

adjusting the direction of view.

5. Adjusting Zoom and Focus

5-1. Turn the lens part of the camera in the direction shown in the picture and pull to separate the lens -hood.

5-2. Use the lens Zoom Lever to set the desired zoom position.

5-3. After setting this position, adjust the Focus Lever to get the picture into focus.

5-4. When the zoom and focus settings are finished, rotate the Zoom and Focus Levers to fix the lens in position.

5-5. After the adjustment, put the lens hood onto the camera body and rotate it in the locking direction to connect it.

E

8

9

Page 4 Page 6
Image 5
Page 4 Page 6
Contents SOC-320P Risk of Electric Shock do not Open Important Safety InstructionsLook at the SOC-320P Table of ContentsCheck the Contents of the Package Before Installing SOC-320PInstalling the SOC-320P Installing the SOC-320PPin arrangement for the SOC-320P RJ-45 connector Specifications for Outer Connector PinSetting the brightness Iris setting Pin NoPart No. AB68-00435A SOC-320P Product SpecificationSOC-320P Product Spec
Top Page Image Contents