Samsung HW-J6001R/ZF, HW-J6001R/EN, HW-J6000R/EN manual LED Indicator Lamp Status on Subwoofer, Led

Page 16

CONNECTIONS

●● Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

●● If the main unit is powered off, the wireless subwoofer will in standy mode and the STANDBY LED on the front will blink Red directly. (no blue LED).

●● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.

●● The maximum transmission distance of the wireless signal between the main unit and subwoofer is about 10 meters, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the wireless signal cannot penetrate metal.

●● If the main unit doesn't make a wireless connection, follow steps 1-5 on the previous page to re-set the connection between the main unit and wireless subwoofer.

●● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture.

●● For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions.

LED INDICATOR LAMP STATUS ON SUBWOOFER

LED

Status

Description

Resolution

 

 

Standby (with the Soundbar main

Check the power supply to the

Red

On

unit turned off)

Soundbar main unit

Connection failed

Connect again

 

 

(refer to the instructions on manual

 

 

 

connection in the user manual)

 

On

Successfully connected

-

 

(normal operation)

 

 

 

Blue

 

Standby (with the Soundbar main

Check the power supply to the

Blinking

unit turned off)

Soundbar main unit

 

Connection failed

Connect again

 

 

(refer to the instructions on manual

 

 

 

connection in the user manual)

Red and blue

Blinking

Malfunction

Contact the service centre.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Imagine the possibilities Safety Information Safety WarningsPrecautions ENGContents Check for the supplied accessories shown below WHAT’S IncludedBefore Reading the USER’S Manual ++Icons used in this manualControls the volume level Turns the power on and offDisplays the current mode Connect to the Analogue output of an external device Rear / Bottom PanelConnect USB devices here to play files on the devices Auto Power Link Remote ControlAuto Power Link function is only available in the D.IN mode Sound Control Installing the Battery in the Remote Control ++Controlling the Soundbar using Your TV Remote ControlMute buttons in this function Manufacturers supporting this functionInstalling the Wall Mount Installing the Soundbar++Installation Precautions Center Line ENG Installing the Soundbar AS a FREE-STANDING Unit Placing the Soundbar on a TV StandConnecting to the Subwoofer Automatically Connecting the SubwooferConnecting to the Subwoofer Manually LED Indicator Lamp Status on Subwoofer LEDConnecting the SWA-8000S Sold Separately Connecting the Surround Speakers Sold Separately Wireless Receiver ModuleConnecting to a TV TV SoundconnectConnecting to a TV Using AN Hdmi Digital Cable ++Using the Bluetooth Power On function++Auto Power Link Connecting to a TV Using a Digital Optical CableOptical Cable not supplied Hdmi Cable Connecting to External DevicesOptical or Analogue Audio Cable USB ++AUX Cable++Optical Cable ++Before you connect a USB deviceMpeg 1 Layer2 16KHz ~ 48KHz 80kbps~320kbps 16KHz ~ 96KHz 48kbps~320kbps16KHz ~ 96KHz 128kbps~192kbps 1ch 320kbps 24KHz ~ 96KHz 48kbps~64kbps 1ch 160kbpsInput Mode Auto Power Down FunctionInput mode Display You wantBluetooth To Connect the Soundbar to a Bluetooth DeviceBluetooth Power on Bluetooth Power To Disconnect the Bluetooth Device from a SoundbarTo Disconnect the Soundbar from a Bluetooth Device Another mode or turn off the Soundbar++More About Bluetooth ++Launching the Samsung Audio Remote AppSoftware Update Updating ProcedureIf Update is not Displayed Troubleshooting ¼¼Move closer to the unitSupports TV SoundConnect Hold the p button for 5 secondsSpecifications USBWireless Models including the frequency of 5.15GHz-5.35GHz LicencesUnited Kingdom Tel 0818Country Contact Centre  Web Site ` Europe
Related manuals
Manual 170 pages 49.56 Kb Manual 170 pages 36.12 Kb Manual 136 pages 51.84 Kb Manual 1 pages 49.7 Kb Manual 77 pages 15.83 Kb Manual 77 pages 42.12 Kb Manual 257 pages 62.13 Kb Manual 62 pages 53.42 Kb

HW-J6011R/XE, HW-J6001R/ZF, HW-J6001R/XN, HW-J6010R/XE, HW-J6001R/EN specifications

The Samsung HW-J6000 series of soundbars, including models HW-J6000R/EN, HW-J6000R/ZF, HW-J6001R/EN, HW-J6010R/XE, and HW-J6001R/XN, deliver exceptional audio performance that enhances your home entertainment experience. Designed to complement modern TVs, these soundbars combine sleek aesthetics with cutting-edge sound technologies.

One of the standout features of the HW-J6000 series is its multi-speaker setup, which enables an immersive surround sound experience. With built-in speakers and a dedicated subwoofer, these soundbars create rich, deep bass and clear high frequencies, bringing movies, music, and games to life. The powerful audio performance is backed by Samsung's proprietary technologies, such as Crystal Clear Sound, which ensures that dialogue is crisp and music is vibrant.

Another significant technology found in the HW-J6000 series is the TV Sound Connect feature, allowing users to easily connect their soundbar to a compatible Samsung TV via Bluetooth. This wireless connectivity eliminates the clutter of cables and simplifies the setup process while maintaining high-quality audio streaming.

Moreover, the HW-J6000 series supports multiple audio formats, including Dolby Digital, which enhances the overall sound experience. The soundbar's adaptive sound technology automatically analyzes the content being played and optimizes audio settings for optimal performance, ensuring that users enjoy the best sound quality regardless of what they are watching.

The sleek design of the HW-J6000 series also deserves a mention. With a slim profile and minimalist design, these soundbars can be mounted on the wall or placed on a TV stand without overpowering your home décor. The stylish finish complements modern TVs and adds an elegant touch to your entertainment space.

Additionally, the HW-J6000 series features a variety of sound modes, including Surround mode, which creates an expansive sound field for an immersive listening experience, and Smart mode, which automatically adjusts sound settings based on your environment.

Overall, the Samsung HW-J6000 series soundbars offer a perfect combination of advanced audio technologies, sleek design, and user-friendly features, making them an excellent choice for anyone looking to enhance their home entertainment setup. Whether you're a movie buff, a gaming enthusiast, or a music lover, these soundbars provide the audio performance you need to elevate your experience.
Top Page Image Contents