Samsung HW-M4501/ZF, HW-M4500/ZG, HW-M4500/EN, HW-M4500/ZF, HW-M4501/EN manual Bracket-Wall pieces

Page 31

2.Mark the location where the screws will go through on the wall, and then remove the Wall Mount Guide. Next, drill holes for the screws using an appropriately sized drill bit.

Center Line

Center Line

3.Fasten the 2 Bracket-Wallpieces firmly to the wall at the marked locations using the appropriate screws.

4.Attach the Soundbar to the 2 Bracket-Wallpieces as shown in the illustration.

5.Insert a Holder-Fix Mount into each hole on the product’s bottom side. Tighten each Holder-Fix Mount to fix the Soundbar to the

2 Bracket-Wall pieces.

•• Do not hang onto the installed unit and avoid striking or dropping the unit.

•• Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or damage the product.

•• When the unit is installed on a wall, please make sure that children do not pull any of the connecting cables, as this may cause it to fall.

•• For the optimal performance of a wall mount installation, install the speaker system at least 5 cm below the TV, if the TV is mounted on the wall.

•• For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely to fall.

ENG - 27

Image 31 Contents
Full Manual Wiring the Main Power Supply Plug UK Only Safety InformationPrecautions About this Manual ContentsInstalling the Wall Mount Connecting an External DeviceConnecting a USB Connecting a Mobile Device Using the Remote ControlChecking the Components Top Panel / Front Panel of the Soundbar Product OverviewOptical in D.IN Bottom Panel of the SoundbarConnecting Electrical Power Connecting the SoundbarLED Indicator Lights on the top of Subwoofer Connecting the Soundbar to the SubwooferAutomatic connection between the subwoofer and the Soundbar ID SET Check before performing the manual connectionPrecautions Method 1. Connecting with a Cable Connecting to Your TVConnecting a TV using an Hdmi Cable Connecting using an Optical Cable Initial connection Method 2. Connecting WirelesslyConnecting a TV via Bluetooth Auto Power LinkDisconnecting the Soundbar from the TV What are the BT Ready and BT Pairing statuses?If the device fails to connect Connecting using an Hdmi Cable Connecting AN External DeviceAudio AUX Cable Connecting using an Optical or Analogue Audio AUX CableOptical Cable USB Connecting a USBAac File Format Type Compatibility listSelect AV Samsung Soundbar Mxxxx M-Series from the list Connecting a Mobile DeviceConnecting via Bluetooth If the device fails to connectBluetooth Power On Bluetooth Power Disconnecting the Soundbar from the Bluetooth device Disconnecting the Bluetooth device from a SoundbarMore About Bluetooth Installing the Samsung Audio Remote App Using the Samsung Audio Remote AppLaunching the Samsung Audio Remote App How to Use the Remote Control Using the Remote ControlSPORTS, or Movie Press the indicated areas to select Up/Down/Left/Right Woofer VOL Adjusting the Soundbar volume with a TV remote controlOutput specifications for the different sound effect modes Using the Hidden ButtonsWallmount Components Installation PrecautionsWall Mount Guide Bracket-Wall pieces System firmware in the future Updating ProcedureUSB port If Update is not displayedTroubleshooting Open Source Licence Notice LicenceSpecifications Specifications and GuideENG Tel 0818 United KingdomContact Samsung World Wide
Related manuals
Manual 182 pages 9.38 Kb Manual 614 pages 42.38 Kb Manual 182 pages 43.95 Kb Manual 146 pages 11.46 Kb Manual 106 pages 28.38 Kb Manual 132 pages 44.03 Kb Manual 146 pages 7.06 Kb Manual 106 pages 5.96 Kb Manual 106 pages 61.32 Kb Manual 132 pages 3.37 Kb