Samsung MAXDN87RH/ELS Playing a Disc, Selecting a Disc in the CD changer, Playback, To play Press

Loading and Changing Compact Discs

The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter.

Never force the compact disc carrousel when opening and clos- ing the compartment.

Never press down or place objects on the carrousel.

Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on page 35.

1 Switch the system on by pressing On/Standby.

2 Press the Open/Close( ) button on the front panel. Result: The compartment opens.

3 Place one or two discs in the front slots of the carrousel, with the label on the discs facing upwards.

Check that the compact disc has been correctly inserted in the holder before closing the compartment.

4 If you wish to load a third compact disc, press the Disc Change button on the front panel (or Disc Skip on the remote control). Result: The carrousel rotates by 120°.

5 Close the compartment by pressing the Open/Close( ) button again.

If you wish to start playing a disc directly, you can also proceed as follows.

To play...	Press...
Disc 1	DVD/CD (	) or Disc 1
Disc 2	Disc 2
Disc 3	Disc 3

Playing a Disc

GB

	Playback
1	Press the Open/Close( ) button.
2	Insert a DVD disc.

Place a disc gently into the tray with the disc's label facing up.

3 Press the Play/Pause( ) button or Open/Close( ) button to close the disc tray.

PausingPlayback

Press the Play/Pause ( ) button during playback.

To resume, press the Play/Pause ( ) button again.

Depending on the disc, the initial disc information screen may look disc to disc.

When playing a DVD containing MPEG format, video may not be reproduced correctly and you may get picture distortion.

Stopping Playback

Press the Stop ( ) button during playback.

During playback, when the Stop ( )button is pressed, the position is stored

in the memory, and STOP is shown on the display.

When the Play/Pause ( ) button or Return button is pressed subsequently , playback resumes from the position at which it was stopped. If the Stop ( ) button is pressed a second time, the resume play' memory

function is canceled, and STOP is shown on the display. When the

Play/Pause ( )button is pressed, playback starts from the beginning.

Result: The compartment closes automatically and the disc selected starts playing.

6 To change or unload the compact disc changer, repeat Steps 2 to 5.

Keep the compartment closed whenever you are not using it, to prevent dust from entering.

On/StandbyDemo

Disc1 Disc2 Open/Close

Disc3 Disc Change

1,3

Dolby Power

Surround Sound

You can load or unload compact discs when the radio, tape or auxiliary source function is selected.

									2,5
						5	Disc1		Disc2	Open/Close
							Disc3		Disc Change
								4
							Dolby		Power
On/Standby	Demo						Surround		Sound
	Timer/
	Clock						DSP/EQ		S.Bass
1	Display		Band	5
		R						Dolby Digital
	RDS
	PTY		TUNER	DVD/CD	TAPE	AUX			Volume
	Mono/ST.	Down	Tuning Mode	Up		Multi Jog
	Display
		Counter	Memory	REV.Mode
		Reset
	Enter

Timer/
Clock					DSP/EQ	S.Bass
Display		Band		3
	R					Dolby Digital
RDS
PTY		TUNER	DVD/CD	TAPE	AUX	Volume

Selecting a Disc in the CD changer

The CD function is automatically selected when DISC SKIP is pushed.

To select a specific disc, press the corresponding Disc (1, 2, 3) button on the front panel or Disc Skip on the remote control, until the required disc indicator flashes.

If you use the Disc (1, 2, 3) function when listening to the radio or to a tape, the system switches automatically to the DVD/CD mode.

If the disc selected is not loaded, the next disc is played auto- matically.

Disc1	Disc2	Open/Close
Disc3	Disc Change

13