Setting the Clock
During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1.Switch the system on by pressing the POWER ( ) button.
2.Press the TIMER SET button and then press
the ENTER ( ) button, "CLOCK" is displayed.
3. Press the ENTER ( ) button. The hour flashes.
•To increase the hours, press: ,
•To decrease the hours, press: .
4.When the correct hour is displayed, press the
ENTER ( ) button. The minutes flash.
•To increase the minutes, press: ,
•To decrease the minutes, press: .
5.When the correct minute is displayed, press the
ENTER ( ) button. " TIME" appears in the display.
•The current time is now set.
• You can display the time, even when you are using another function, by pressing the TIMER SET button once.
•You can also use the ], [ or the VOLUME/JOG control on the front panel instead of the , or . button in Steps 3 and 4.
Timer Function
The timer enables you to switch the system on or off at specific times automatically.
•Before setting the timer, confirm that the current time is correct.
•During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
•If you no longer want the system to be switched on or off automatically, cancel the timer by pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1.Switch the system on by pressing the POWER ( )button.
2.Press the TIMER SET button until TIME is displayed.
3.Press the ENTER ( ) button.
Result: ON is displayed for a few seconds. You can set the timer
4.Set the timer
a.Press the , or . button to set the hours.
b.Press the ENTER ( ) button. Result: The minutes flash.
c.Press the , or . button to set the minutes.
d.Press the ENTER ( ) button.
Result: OFF is displayed for a few seconds. You can now set the timer
5.Set the timer
a.Press the , or . button to set the hours.
b.Press the ENTER ( ) button. Result: The minutes flash.
c.Press the , or . button to set the minutes.
d.Press the ENTER ( ) button.
Result: VOL XX is displayed, where XX corre- sponds to the volume already set.
6.Press the , or . button to adjust the volume level, and then press the ENTER ( )button. Result: The source to be selected is displayed.
7.Press the , or . button to select the desired source to be played when the system switches on.
If you select... You must also...
FM (radio) | a Press the ENTER ( | ) button. |
bSelect a preset station by pressing the , or . button.
CD/MP3 (compact disc) | Load one compact disc. |
USB | Connect the USB device. |
8.Press the ENTER ( ) button.
Result: CHKREC (Do you want to record?) is dis- played.
9.Press the ENTER ( ) button.
Result: REC N is displayed. You can press the
,or . button to select REC Y or REC N, and
then press ENTER ( ) button.
1). If you select REC N, the MiNi
2). If you select the REC Y, you can set the MiNi
a.Press the ENTER ( ) button.
Result: ON is displayed for a few seconds. You can set the tuner timer recording
English 15