Samsung MML7, MM-L7 Setting the Clock Listening to a Compact Disc, Press Program/Set, To...Press

Setting the Clock Listening to a Compact Disc

Your system is equipped with a clock which allows you to turn GB your system on and off automatically. You should set the clock:

When you purchase the Micro component system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1Switch the system on by pressing On/Standby.

2Press Timer/Clock twice.

Result: CLOCK is displayed.

3Press Program/Set.

Result: The hour flashes.

4To...Press...

Increase the hours Decrease the hours

5When the correct hour is displayed, press Program/Set.

Result: The minutes flash.

6To...Press...

Increase the minutes Decrease the minutes

7When the correct time is displayed, press Program/Set.

Result: The clock starts and is displayed, even when the system is in standby mode.

You can display the time, even when you are using another function, by pressing Timer/Clock once.

On/Standby

		Sleep	Mute
1
Power	Preset	Timer	Timer/
Sound	EQ	on/off	Clock
			2
Mono/ST.	Tape	Repeat	Program/
	Mode		Set
			3 5 7
	CD/TAPE/MP3
Band		Function
	VOL.
	Tuning
4 6	Mode		4 6

VOL.

You can play 12 cm or 8 cm compact discs without an adapter.

This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R and CD-RW.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

1Select the CD function by pressing FUNC. button.

2 Press the Open/Close ( ) button on the front panel.

Result: The compartment opens.

3Place your disc in the compartment, with the label on the disc facing upwards.

4	Close the compartment by pressing the Open/Close ( )
	button again.
	Result:	The display indicates the number of tracks
		on the disc.

5Press the PLAY/PAUSE (ˆ ¨) button.

Result: The first track on the disc plays and the track number is displayed.

6To stop playback temporarily, press the PLAY/PAUSE (ˆ ¨) button.

Press PLAY/PAUSE (ˆ ¨) again to continue playing the disc.

7Press the STOP (■) button when you have finished.

				2 4
				CD Door Open/Close
				1 FUNC.
		Volume
R	5 6 CD/TAPE/TUNING
		Tuning Mode	Display
	CD Repeat		Repeat A	B
	7		PTY
		Preset EQ	+10 (CD)
	Band
			Record
	PROG./Set	CD Synchro	Start/Stop

	CD/TAPE/MP3
7	5 6
Band	Function

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

◆You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

◆Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

◆CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)

10